[Asterisk-Users] Extension cannot match ! receiving call mISDN ...

[Joao Correia]

Hello,

Making calls works fine on a Beronet 1 port card connected to an ISDN line
PTP.
I cant seam to receive any calls. Asterisk says it cannot match extension.
The funny is that I tested this configuration on a ptmp and it worked.

Any tips ?

Thanks
Joao Correia

### Extensions.conf #############
exten => _X.,1,Ringing
exten => _X.,2,Dial(SIP/4200&SIP/4201)
exten => _X.,20,Hangup

### misdn.conf #############

[intern]
; define your ports, e.g. 1,2 (depends on mISDN-driver loading order)
ports=1
; context where to go to when incoming Call on one of the above ports
context=misdn-in
msns=*

########## This is my CLI: ####################

*CLI> I IND :SETUP oad:962988882 dad:0 port:1
 --> mode:TE cause:16 ocause:16 rad:
 --> info_dad: onumplan:0 dnumplan:0 rnumplan:
 --> channel:1 caps:Speech pi:0 keypad:
 --> urate:0 rate:0 mode:0 user1:0
 --> pid:0 addr:0 l3id:2000c
 --> Bearer: Speech
 --> Codec: Alaw
 --> * NEW CHANNEL dad:0 oad:962988882 ctx:misdn-in
 --> * CallGrp: PickupGrp:
 --> rxgain:0 txgain:0
Extension can never match, so disconnecting
I SEND:DISCONNECT oad:962988882 dad:0 port:1
 --> mode:TE cause:16 ocause:1 rad:
 --> info_dad: onumplan:0 dnumplan:0 rnumplan:
 --> channel:1 caps:Speech pi:0 keypad:
 --> urate:0 rate:0 mode:0 user1:0
 --> pid:0 addr:0 l3id:2000c
Unhandled Message: prim 20181 len -22 from addr 0, dinfo 0 on port: 0
I IND :RELEASE oad:962988882 dad:0 port:1
 --> mode:TE cause:-1 ocause:1 rad:
 --> info_dad: onumplan:0 dnumplan:0 rnumplan:
 --> channel:1 caps:Speech pi:0 keypad:
 --> urate:0 rate:0 mode:0 user1:0
 --> pid:0 addr:0 l3id:2000c
Idx:0 stack->cchan:0 Chan:1
Idx:1 stack->cchan:0 Chan:2
Idx:0 stack->cchan:0 Chan:1
Idx:1 stack->cchan:0 Chan:2
I IND :CLEAN_UP oad: dad: port:1
 --> mode:TE cause:16 ocause:16 rad:
 --> info_dad: onumplan:0 dnumplan:0 rnumplan:0
 --> channel:0 caps:Speech pi:0 keypad:
 --> urate:0 rate:0 mode:0 user1:0
 --> pid:0 addr:0 l3id:2000c
Trying to Release bc with l3id: 2000c
* RELEASING CHANNEL pid:0 ctx:misdn-in dad:0 oad:962988882 state:
EXTCANTMATCH
 --> * State Down
 --> Setting AST State to down
 --> * State Wait4dig | ExtCantMatch
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051221/9e161db6/attachment.htm