[Asterisk-Users] Channel 0/1, span 1 got hangup request

Tue Dec 13 11:56:18 MST 2005

Steve Totaro wrote:
> What are you doing in between making changes and testing the changes?
After changing settings I reboot system! Really. :)
Because other actions have no effect. Also reboot, too..
> 
> Thanks,
> Steve
> 
> 
>>>Just a couple guesses on things to try.
>>>
>>>Zapata.conf
>>>1.  Changing switchtype variables (doubtful but give it a try).
>>>2.  Add a variable to define "pridialplan" (I remember someone
> 
> setting
> 
>>>this to "unknown" to solve a similar issue)  Try pridialplan=unknown
>>>and/or prilocaldialplan=local or some other valid option.
>>
>>A do this config, but no effects....
>>
>>
>>>Zaptel.conf
>>>1.  span=1,1,5,ccs,hdb3
>>>
>>>I think that your dial statement or the pridialplan is your issue.
> 
> If
> 
>>>you look at the debug info
>>>Here is something suspicious:  "-- Called g1/100" unless 100 is the
>>>number you are trying to dial outbound.
>>>If the above fails, then try below.
>>>Try tweaking your settings here like span=1,0,0,ccs,hdb3
>>>What is the provider expecting?
>>
>>No effect on settings:
>>span=1,0,0,ccs,hdb3
>>span=1,1,5,ccs,hdb3
>>span=1,2,4,ccs,hdb3
>>
>>
>>>Thanks,
>>>Steve
>>
>>
>>>Dear Users,
>>>
>>>I have an Digium Wildcard TE110P T1/E1 Card inserted in Linux box
>>
>>runnig
>>
>>>Asterisk 1.2.0
>>>All incoming calls from E1 interface to SIP-phone goes exellent, but
>>>calls from SIP to E1 gives the errors:
>>>
>>>     -- Executing Dial("SIP/anton-6cf4", "Zap/g1/100") in new stack
>>>-- Making new call for cr 32775
>>>     -- Requested transfer capability: 0x00 - SPEECH
>>>
>>>>Protocol Discriminator: Q.931 (8)  len=43
>>>>Call Ref: len= 2 (reference 7/0x7) (Originator)
>>>>Message type: SETUP (5)
>>>>[04 03 80 90 a3]
>>>>Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer
>>>
>>>capability: Speech (0)
>>>
>>>>                             Ext: 1  Trans mode/rate: 64kbps,
>>>
>>>circuit-mode (16)
>>>
>>>>                             Ext: 1  User information layer 1:
> 
> A-Law
> 
>>>(35)
>>>
>>>>[18 03 a9 83 81]
>>>>Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,
>>>
>>>Exclusive Dchan: 0
>>>
>>>>                       ChanSel: Reserved
>>>>                      Ext: 1  Coding: 0   Number Specified
> 
> Channel
> 
>>>Type: 3
>>>
>>>>                      Ext: 1  Channel: 1 ]
>>>>[28 05 41 6e 74 6f 6e]
>>>>Display (len= 5) +)│@-│@hm+ at +0-@&│@>[ Anton ]
>>>>[6c 0d 21 81 38 34 37 37 33 36 31 38 31 38 33]
>>>>Calling Number (len=15) [ Ext: 0  TON: National Number (2)  NPI:
>>>
>>>ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>>>
>>>>                          Presentation: Presentation permitted,
> 
> user
> 
>>>number passed network screening (1) '84773618183' ]
>>>
>>>>[70 04 a1 31 30 30]
>>>>Called Number (len= 6) [ Ext: 1  TON: National Number (2)  NPI:
>>>
>>>ISDN/Telephony Numbering Plan (E.164/E.163) (1) '100' ]
>>>     -- Called g1/100
>>>< Protocol Discriminator: Q.931 (8)  len=9
>>>< Call Ref: len= 2 (reference 7/0x7) (Terminator)
>>>< Message type: DISCONNECT (69)
>>>< [08 02 80 90]
>>>< Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0
>>>Location: User (0)
>>><                  Ext: 1  Cause: Unknown (16), class = Normal Event
>>
>>(1) ]
>>
>>>-- Processing IE 8 (cs0, Cause)
>>>     -- Channel 0/1, span 1 got hangup request
>>>Dec  5 15:30:12 WARNING[30946]: app_dial.c:706 wait_for_answer:
> 
> Unable
> 
>>>to forward voice
>>>NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect
> 
> Indication,
> 
>>>peerstate Disconnect Request
>>>
>>>>Protocol Discriminator: Q.931 (8)  len=9
>>>>Call Ref: len= 2 (reference 7/0x7) (Originator)
>>>>Message type: RELEASE (77)
>>>>[08 02 81 90]
>>>>Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0
>>>
>>>Location: Private network serving the local user (1)
>>>
>>>>                 Ext: 1  Cause: Unknown (16), class = Normal Event
>>
>>(1) ]
>>
>>>     -- Hungup 'Zap/1-1'
>>>   == No one is available to answer at this time (1:0/0/0)
>>>< Protocol Discriminator: Q.931 (8)  len=9
>>>< Call Ref: len= 2 (reference 7/0x7) (Terminator)
>>>< Message type: RELEASE COMPLETE (90)
>>>< [08 02 80 d1]
>>>< Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0
>>>Location: User (0)
>>><                  Ext: 1  Cause: Unknown (81), class = Invalid
>>
>>message
>>
>>>(5) ]
>>>-- Processing IE 8 (cs0, Cause)
>>>NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
>>>NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
>>>     -- Timeout on SIP/anton-6cf4
>>>   == CDR updated on SIP/anton-6cf4
>>>     -- Executing Hangup("SIP/anton-6cf4", "") in new stack
>>>
>>>
>>>/etc/zaptel.conf
>>>span=1,1,5,ccs,hdb3
>>>bchan=1-15,17-31
>>>dchan=16
>>>loadzone = nl
>>>defaultzone=nl
>>>
>>>/etc/asterisck/zapata.conf
>>>[trunkgroups]
>>>[channels]
>>>language=en
>>>signalling=pri_cpe
>>>switchtype=euroisdn
>>>echocancel=32
>>>echocancelwhenbridged=yes
>>>usecallerid=yes
>>>callerid=asreceived
>>>transfer=yes
>>>overlapdial=yes
>>>cancallforward=yes
>>>group=1
>>>context=zapata
>>>channel => 1-15,17-31
>>>
>>>Has anybody resolve this problem?
>>>
>>>--
>>>SY,
>>>Anton V Bakulev.
>>>MIPT-telecom.
>>>bakulev at mipt.ru
>>
>>_______________________________________________
>>--Bandwidth and Colocation provided by Easynews.com --
>>
>>Asterisk-Users mailing list
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>_______________________________________________
>>--Bandwidth and Colocation provided by Easynews.com --
>>
>>Asterisk-Users mailing list
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users


-- 
С уважением,
Бакулев Антон.
МФТИ-телеком.
тел. +7(095)576-4381, +7(095)408-7733
факс. +7(095)576-4563