[Asterisk-Users] g729 translation to zap (ISDN) doesn´t work

[Klaus Peras]

Hi Asterisk Users,

i have a bristuffed-0.2.0-RC8q Asterisk 1.0.9 System running on a Debian 
3.1. With a quadbri card installad, wich is running on the bristuff drivers.
Everything seems to be fine so far.
but now i wanted to use the g.729A Codec. I bought 5 licences and 
installed them:
asterisk3*CLI> show g729
0/0 encoders/decoders of 5 licensed channels are currently in use

 When i do sip to sip calls, everything is working fine (from a snom 190 
wich is running with that codec to a sip phone with g.711a), asterisk is 
translating correct.
the output on the CLI is:
asterisk3*CLI> show g729
1/0 encoders/decoders of 5 licensed channels are currently in use

But if i try to call a zap channel from that sip phone (snom 190) wich 
runs that g729 Codec, i don´t hear anything on the ISDN Phone. the 
output on the CLI:
asterisk3*CLI> show g729
1/1 encoders/decoders of 5 licensed channels are currently in use

Here is the output of the show channel command for the SIP Channel and 
the ZAP Channel:

asterisk3*CLI> show channel SIP/71-d293
 -- General --
           Name: SIP/71-d293
           Type: SIP
       UniqueID: asterisk-2204-1134137006.49
      Caller ID: 30071
    DNID Digits: 329
          State: Up (6)
          Rings: 0
   NativeFormat: 256
    WriteFormat: 256
     ReadFormat: 64
1st File Descriptor: 31
      Frames in: 7949
     Frames out: 7956
 Time to Hangup: 0
   Elapsed Time: 0h2m39s
 --   PBX   --
        Context: default
      Extension: 329
       Priority: 2
     Call Group: 0
   Pickup Group: 0
    Application: Dial
           Data: Zap/g1/329
          Stack: 0
    Blocking in: ast_waitfor_nandfds
asterisk3*CLI> show channel Zap/1-1
 -- General --
           Name: Zap/1-1
           Type: Zap
       UniqueID: asterisk-2204-1134137006.50
      Caller ID: 30071
    DNID Digits: 329
          State: Up (6)
          Rings: 0
   NativeFormat: 72
    WriteFormat: 64
     ReadFormat: 256
1st File Descriptor: 13
      Frames in: 8255
     Frames out: 8246
 Time to Hangup: 0
   Elapsed Time: 0h0m0s
 --   PBX   --
        Context: default
      Extension: s
       Priority: 1
     Call Group: 0
   Pickup Group: 0
    Application: Bridged Call
           Data: SIP/71-d293
          Stack: -1
    Blocking in: ast_waitfor_nandfds

I don´t know what i can do on this problem and would be pleased to get 
some help.

Thank you very much!

-- 


Mit freundlichen Grüßen
With kind regards

Klaus Peras




-------------- next part --------------
A non-text attachment was scrubbed...
Name: klaus.peras.vcf
Type: text/x-vcard
Size: 264 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20051213/1956d0c0/klaus.peras.vcf