[Asterisk-Users] [helpp] Problem in astersik
Talat Ishtiaq
talat at thespinnakers.com
Mon Dec 12 05:00:05 MST 2005
Hi Kiss
I am trying to run it on p3 machine i think it should be enough
Regard
Talat
On Mon, 2005-12-12 at 12:18 +0100, Kiss Karoly wrote:
> Hello,
>
> This looks like the asterisk you are using was compiled for a higher class
> CPU then the one running it.
>
> Regards
> Kiss Karoly
>
> On Mon, 12 Dec 2005, Talat Ishtiaq wrote:
>
> > Date: Mon, 12 Dec 2005 15:48:11 +0500
> > From: Talat Ishtiaq <talat at thespinnakers.com>
> > To: Mark Edwards <mark.p.edwards at gmail.com>
> > Cc: Asterisk Users Mailing List - Non-Commercial Discussion
> > <asterisk-users at lists.digium.com>
> > Subject: Re: [Asterisk-Users] [helpp] Problem in astersik
> >
> > Hi Mark
> >
> >
> > The
> >
> > #/usr/sbin/astersik -vc
> > -------------------(many verbosity)
> > Illegal instruction
> > [root at test postfix]# /usr/sbin/asterisk
> > [root at test postfix]# /usr/sbin/asterisk -rvvvv
> > Unable to connect to remote asterisk
> >
> > still give me illegal instruction in the end.
> >
> >
> > As long as i remember i did not get any error during make and make
> > install command.
> > What packages do you want me to update on my fedora core 3 machine
> > Plz tell me
> >
> >
> > Regard
> > Talat
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > On Mon, 2005-12-12 at 21:16 +1100, Mark Edwards wrote:
> >> Hi.
> >>
> >> First off, the illegal instruction doesn't look at all pretty.
> >>
> >> The best way to start a new installation is to start asterisk thus:
> >>
> >> /usr/sbin/asterisk -vc
> >>
> >> when you get a clean start with no fatal or significant errors, you
> >> can close it out and then start it as a daemon
> >>
> >> /usr/sbin/asterisk
> >>
> >> Only then can you use "-r" to connect to the remote console.
> >>
> >> I would suggest if you are having "illegal instruction' messages, then
> >> asterisk isn't starting cleanly, and you have a significant
> >> compilation issue on your hands.
> >>
> >> I would make sure your FC3 box is up2date and that you are not seeing
> >> any significant compilation errors first.
> >>
> >> Once you have got things going this far, we can then look at your
> >> dialplan...
> >>
> >> cheers,
> >>
> >> Mark
> >>
> >> On 12/12/05, Talat Ishtiaq <talat at thespinnakers.com> wrote:
> >> Hi I am very new to asterisk
> >>
> >> I am facing some problems
> >> I have installed asterisk on my fedora core 3 by tar.gz
> >> by
> >> #cd /usr/local
> >> #tar -xzvf asterisk----.tar.gz
> >> #make
> >> #make install
> >> #make samples
> >> i made following changes in the sip.conf and extention.conf
> >> In sip.conf
> >> [500]
> >> context=fromsip
> >> type=friend
> >> username=500
> >> secret=shanee
> >> callerid="shanee" <500>
> >> host=dynamic
> >> nat=yes
> >> canreinvite=no
> >> disallow=all
> >> allow=ulaw
> >> dtmfmode=info
> >> callgroup=3
> >> pickupgroup=3
> >> qualify=1000
> >>
> >>
> >> [501]
> >> context=fromsip
> >> type=friend
> >> username=501
> >> secret=shanee
> >> callerid="shanee" <501>
> >> host=dynamic
> >> nat=yes
> >> canreinvite=no
> >> disallow=all
> >> allow=ulaw
> >> dtmfmode=info
> >> callgroup=3
> >> pickupgroup=3
> >> qualify=1000
> >>
> >> In externsion.conf
> >> [fromsip]
> >> exten => s,1,Answer( )
> >> exten => _5XX,1,Dial(SIP/${EXTEN},100,tr)
> >> exten => h,1,Hangup
> >> exten => t,1,Hangup
> >> exten => i,1,Hangup
> >>
> >> Then What i did is
> >> [root at test asterisk]# asterisk -rvvv
> >> Unable to connect to remote asterisk
> >> [root at test asterisk]# asterisk -c
> >> Asterisk 1.0.9, Copyright (C) 1999-2004 Digium.
> >> Written by Mark Spencer <markster at digium.com>
> >> =========================================================================
> >> [ Booting...................................................Dec 10
> >> 07:09:47 WARNING[865]: chan_oss.c:257 sound_thread: Read error
> >> on sound
> >> device: Resource temporarily unavailable
> >> ...........Dec 10 07:09:47 WARNING[865]: chan_mgcp.c:4050
> >> reload_config:
> >> Unable to get our IP address, MGCP disabled
> >> ...Dec 10 07:09:47 WARNING[865]: chan_skinny.c:2587
> >> reload_config:
> >> Unable to get our IP address, Skinny disabled
> >> ........................Illegal instruction
> >>
> >>
> >>
> >> I gave these error to forum and i got reply that you should
> >> unload the
> >> mgcp and skinny modules in the modules.conf
> >>
> >> so i unload the following modules by
> >> noload => chan_mgcp.so
> >> noload => chan_skinny.so
> >> noload => chan_oss.so
> >>
> >>
> >> [root at test asterisk]# asterisk -c
> >> Asterisk 1.0.9, Copyright (C) 1999-2004 Digium.
> >> Written by Mark Spencer <markster at digium.com>
> >> =========================================================================
> >> [ Booting......................................................................................Illegal instruction
> >> [root at test asterisk]#
> >>
> >>
> >> Then i try to start it
> >> [root at test asterisk]# asterisk -rvvvv
> >> Unable to connect to remote asterisk
> >> [root at test asterisk]#
> >>
> >>
> >>
> >> So can you tell me why i am having this problem and how can i
> >> solve it
> >>
> >>
> >>
> >> Regard
> >> Talat
> >>
> >>
> >>
> >> _______________________________________________
> >> --Bandwidth and Colocation provided by Easynews.com --
> >>
> >> Asterisk-Users mailing list
> >> To UNSUBSCRIBE or update options visit:
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >>
> >>
> >> --
> >> regards,
> >>
> >> Mark P. Edwards
> >> FWD: 667917
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
More information about the asterisk-users
mailing list