[Asterisk-Users] Asterisk 1.2 chan_misdn modules.conf

[Kristian Kielhofner]

Hello everyone,

	I have a user trying to use chan_misdn with SVN-branch-1.2-r7382M. 
This is with AstLinux 0.3, which uses Linux kernel 2.6.13.3, the 
ISDN4Linux CBS snapshot from 12/7/2005 and mISDNuser from jolly.

	This is interesting, chan_misdn loads just fine when noload => 
chan_misdn.so is specified and you load it after startup with load 
chan_misdn.so.  Works fine.

	Removing the noload line causes asterisk to abort on startup with the 
following:

#################################
Asterisk Dynamic Loader Starting:
   == Parsing '/etc/asterisk/modules.conf': Found
  [chan_misdn.so]Dec  9 18:08:10 WARNING[1816]: loader.c:325
__load_resource: /usr/lib/asterisk/modules/chan_misdn.so: undefined
symbol: ast_pickup_call
Dec  9 18:08:10 WARNING[1816]: loader.c:499 load_modules: Loading
module chan_misdn.so failed!
pbx asterisk #


######################################
If I load chan_misdn.so from CLI it works:

  == Manager registered action DBGet
   == Manager registered action DBPut
   == Parsing '/etc/asterisk/enum.conf': Found
Asterisk Ready.
*CLI> load chan_misdn.so
  Loaded /usr/lib/asterisk/modules/chan_misdn.so => (Channel driver for
mISDN Support (Bri/Pri))
   == Parsing '/etc/asterisk/misdn.conf': Found
Got: 1 from get_ports
   == Registered channel type 'mISDN' (Channel driver for mISDN Support
(Bri/Pri))
   == Registered application 'misdn_set_opt'
   == Registered application 'misdn_facility'
-- mISDN Channel Driver Registred -- (BE AWARE THIS DRIVER IS EXPERIMENTAL!)
*CLI> L1: PH L1Link Down! port:1
I IND :CLEAN_UP oad: dad: port:1
I IND :CLEAN_UP oad: dad: port:1

	What is the proper way to load chan_misdn.so from modules.conf?  The 
only reference I saw to this in the archives was a post from August 
about the differences between 1.2 and 1.0.  Now that chan_misdn is in 
1.2, this shouldn't be an issue.  Right?

Thanks everyone!

-- 
Kristian Kielhofner