[Asterisk-Users] Asterisk on PPC & chan_capi issue
Jason Williams
jas.williams at gmail.com
Fri Dec 9 08:53:35 MST 2005
> > > chan_capi registers fine:
> > > **********************************************************************
> > > [chan_capi.so] => (Common ISDN API for Asterisk)
> > > == This box has 1 capi controller(s).
> > > == Reading config for BRI1
> > > -- ast_capi_pvt BRI1-pseudo-D (<MSN1>,<MSN2>,capi-in,0,2)
> (1,4,128)
> > > -- ast_capi_pvt BRI1 (<MSN1>,<MSN2>,capi-in,0,2) (1,4,128)
> > > -- ast_capi_pvt BRI1 (<MSN1>,<MSN2>,capi-in,0,2) (1,4,128)
> > > -- listening on contr1 CIPmask = 0x1fff03ff
> > > == Registered channel type 'CAPI' (Common ISDN API Driver
> ($Revision:
> > > 1.115 $) )
> > > == Registered application 'capiCommand'
> > > == Registered custom function VANITYNUMBER
> > >
> > > Call from my GSM to a SIP phone (exten 1003) via ISDN/CAPI (MSN2):
> > > **********************************************************************
> > > == BRI1: Incoming call '<my GSM>' -> '<MSN2>'
> > >
> > > -- Executing Macro("CAPI/BRI1/<MSN2>-0", "stdexten|1003|SIP/1003")
> > > in new stack
> > > -- Executing Dial("CAPI/BRI1/<MSN2>-0", "SIP/1003|10|TtwW") in new
> > > stack
> > > Dec 6 02:30:47 WARNING[28889]: channel.c:2494 ast_request: No
> > > translator path exists for channel type SIP (native 65535) to 0
> > > Dec 6 02:30:47 NOTICE[28889]: app_dial.c:1011 dial_exec_full: Unable
> to
> > > create channel of type 'SIP' (cause 0 - Unknown)
> > > == Everyone is busy/congested at this time (1:0/0/1)
Looks like a codec problem when making calls to the SIP phone, ensure your
sip phone has Alaw enabled in sip.conf, and supports the g711alaw codec. In
its config
Jason
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051209/563a2b81/attachment.htm
More information about the asterisk-users
mailing list