[Asterisk-Users] uip200 phone not work with 1.2

[Jerry Geis]

Jason,

I added:

nat=never
qualify=no

and I still cant get a UIP200 to ring when calling it after using 1.2?
Any other suggestions?

Thanks,

Jerry

Jerry Geis wrote:
>/ I have a handful of phones that work with 1.0.9. I was trying to upgrade 
/>/ to 1.2
/>/ and the UIP200 phones dont ring.
/>/ 
/>/ below is my config for 1 phone.
/>/ 
/>/ I tried it with and without the qualify=yes or qualify=no and did not 
/>/ seem to make
/>/ a difference. still no ring.
/>/ 
/>/ Any ideas on what might be the issue?
/>/ 
/>/ THanks,
/>/ 
/>/ Jerry
/>/ --------
/>/ 
/>/ ; Jerry Phone
/>/ [528]
/>/ type=friend
/>/ dtmfmode=rfc2833                ; Choices are inband, rfc2833, or info
/>/ username=something
/>/ secret=something
/>/ disallow=all
/>/ allow=ulaw
/>/ allow=alaw
/>/ host=dynamic
/>/ context=smvoice-sip
/>/ callerid="Jerry" <528>
/
Need to have:

nat=never (or nat=route)

Regards,

-- 
Jason Becker
Director & CEO
Coalescent Systems Inc.
Enabling Open Source Telephony
403.244.8089