[Asterisk-Users] Sipura 3000 Call waiting on the PSTN line

[Rich Adamson]

cp wrote:
> I have configured my SPA-3000 to direct all calls received over PSTN
> interface to Asterisk. That is set up via a dial plan with S0 and works
> fine. CID information is passed along as well. But I find it impossible
> to setup call waiting on the PSTN line. I do subscribe to this service
> from my PSTN provider (SBC). Once a PSTN call comes in, is forwarded to
> asterisk and then to a phone at line 1, Sipura seems oblivious to any
> other calls coming in on PSTN. When I dial my PSTN number with a second
> call I don't see any activity on Sipura. I have set up remote logging
> and the level is set to 3. But I still get no activity in the log for
> the second call. Even the first call logs very little, but it logs
> something. Has anybody been able to get call waiting on the PSTN line? 
> 

The syslog feature in the spa3k does not take affect until after the 
spa3k has been power cycled. It's not a dynamic parameter change like 
most of the other config parameters are.

See other post on the call waiting topic.