[Asterisk-Users] Optipoint 600 Cant boot - development shell active

Anthony Cox anthony at apctech.net
Tue Aug 30 03:25:37 MST 2005


Richard,

Thanks for the pointer, and thanks to Nico at Siemens!

For future reference to procedure to recover from a "Can't Boot!!" situation 
is:
1) Start the Siemens netbootserver
2) Configure the netbootserver with the FTP server where new software image 
is located (must be in the FTP root directory) and have all 5 files present
3) Configure the MAC address and valid IP (one that can talk to the FTP 
server without a router!) in the netbootserver
4) Connect LAN port 2 of the OptiPoint 600 Office to the LAN (or directly 
with a crossover cable)
5) Reboot the phone and tap the screen to initiate the netboot process
6) Wait 5 - 10 minutes while the image and software loads (the screen keeps 
you updated)
7) Reboot the phone.  BINGO phone works again!

Cheers
Anthony.

---------- Original Message -----------
From: richard Coco <coco_richard at yahoo.com>
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-
users at lists.digium.com>
Sent: Fri, 26 Aug 2005 06:08:08 -0700 (PDT)
Subject: Re: [Asterisk-Users] Optipoint 600 Cant boot - development shell 
active

> Hi,
> 
> The only thing i know is that you need a netbootserver
> using five special files. So, if possible, ask Siemens
> for the optipoint 600 netboot upgrade procedure. AFAIK
> it is a known problem...
> 
> hope it helps...
> 
> --- Anthony Cox <anthony at apctech.net> wrote:
> 
> > Not strictly a problem with Asterisk but one of my
> > phones.  A couple of days 
> > ago I decided to update the firmware in my Optipoint
> > 600 Office which looked 
> > as though it went swimmingly until that is, it
> > rebooted.
> > 
> > Since then the phone just boots up and displays the
> > following:
> > Can't Boot!!
> > Development shell active.
> > 
> > It doesn't try to request a DHCP address, in fact it
> > does seem to do anything 
> > on the network and the key pad does nothing.
> > 
> > Can anyone suggest a remedy?  Anyone know how to get
> > the development shell to 
> > do something?
> > 
> > Thanks in advance.
> > Anthony.
> > 
> > --------------------------------------------------
> > Anthony Cox
> > _______________________________________________
> > --Bandwidth and Colocation sponsored by Easynews.com
> > --
> > 
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >   
> >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
------- End of Original Message -------




More information about the asterisk-users mailing list