[Asterisk-Users] IAX2 Softphone Quality & Network Cards
Huddleston, Robert
RHuddleston at cavtel.com
Mon Aug 29 07:19:43 MST 2005
If nic is loaded using modprobe - you can set options for duplex -
depending on the nic...
See /etc/modules.conf
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
> Rich Adamson
> Sent: Monday, August 29, 2005 11:13 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] IAX2 Softphone Quality & Network Cards
>
>
> > > For an asterisk server _always_ statically define the
> duplex setting
> > > on both the switch and the nic card. On sip phones and
> workstations,
> >
> > Can you give an example of how to check the duplex setting and
> > statically define it for, say, RedHat9
>
> Multiple ways... try 'dmesg | grep duplex' or use 'mii-tool'.
>
> Be careful with assumptions relative to what happens after a
> reboot on any system. Static use of the mii-tool within your
> system startup scripts may be necessary to ensure full duplex
> operation.
>
>
> > On Mon, 29 Aug 2005, Rich Adamson wrote:
> >
> > >
> > >> Everything is set to autoneg, NICs, switches and router
> > >>
> > >
> > > To ensure reasonable performance, key devices (eg,
> routers, servers)
> > > should _always_ have duplex settings statically defined. Speed is
> > > less of an issue as the 10/100 negotiation is hard to get wrong.
> > >
> > > Part of the duplex negotiation problem is that consistent
> standards
> > > have not been implemented by all manufacturers (and nic
> card drivers).
> > > The two ends of a cat5 cable will often times try to auto
> negotiate
> > > the duplex settings at roughly the same time, and 50% of
> the time it
> > > will be wrong (eg, mismatched). As someone mentioned previously,
> > > mismiatched duplex settings will seriously impact performance and
> > > throughput.
> > >
> > > Keep in mind that opening the cat5 cable at either end
> (eg, unplug
> > > and replug the rj45) will cause a re-nogitation, as will
> a reboot,
> > > etc.
> > >
> > > There are a lot of systems and drivers that don't include
> the code
> > > to tell you what the actual duplex setting is after a
> re-negotiation.
> > > MS-based products are poor, and finding the actual
> setting in many
> > > of the linux distro's is not necessarily easy.
> > >
> > > For an asterisk server _always_ statically define the
> duplex setting
> > > on both the switch and the nic card. On sip phones and
> workstations,
> > > the duplex setting is less important, but should still
> match at both
> > > ends of the cable.
> > >
> > > (FWIW, my company does professional network performance
> assessments
> > > and you couldn't even guess how many large & small
> corporate admins
> > > don't have a clue. That's based on 12 years of experience
> at sites
> > > in over 40 US states.)
> > >
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation sponsored by Easynews.com --
> > >
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > Thanks in advance,
> >
> --------------------------------------------------------------
> ----------
> > Steve Edwards sedwards at sedwards.com Voice:
> +1-760-468-3867 PST
> > Newline pagesteve at sedwards.com Fax:
> +1-760-731-3000
> > _______________________________________________
> > --Bandwidth and Colocation sponsored by Easynews.com --
> >
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> ---------------End of Original Message-----------------
>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list