[Asterisk-Users] Multiple PCI cards

[Asterisk]

I have 2 TE410P's and a TDM400P in same machine without issues

Bart

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Damon Estep
Sent: Sunday, August 28, 2005 10:59 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Multiple PCI cards




> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Garth van Sittert
> Sent: Sunday, August 28, 2005 11:46 AM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Multiple PCI cards
> 
> Hi All
> 
> Does anyone know if multiple Digium cards on a single machine will be
a
> problem.
> 
> Machine specs:  Dual Zeon 3.0GHz on Intel server board.
> Cards:               TE411P, TDM400P, TDM400P
> 
> I will turn off all unnecessary PCI devices; USB, parallel, serial,
etc...
> 
> Thanks


Have not tried it since November 2004, but at that time I ended up
replacing the FXO/FXS cards with sipura SPA3000 ?(check model number,
its been awhile). Each one gave 1FXO/1FXS port so 4 of them replaced 2 4
port TDM cads. Works well.

Again, this was almost a year ago, so look for more feedback for users
that have tried it with current hardware/firmware/software.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users