[Asterisk-Users] Problems with registration
Joshua Abbott
jabbott at successfulhosting.com
Sat Aug 27 15:31:19 MST 2005
BTW, any password that is filled in is a test password and doesn't
actually exist :)
Joshua Abbott wrote:
> My phone still says Not-Registered. I have a Polycom SoundPoint 600
> SIP phone.
> Here is my sip.conf file:
>
> ;
> ; SIP Configuration
> ;
>
> [general]
> context=default ; Default context for incoming calls
> port=5060 ;added
> bindport=5060 ; UDP Port to bind to (SIP standard port is
> 5060)
> bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all)
> srvlookup=yes ; Enable DNS SRV lookups on outbound calls
>
> ; START FWD1 ACCT
> register=691657:ImaCowsertjoshu at fwd.pulver.com/691657
> [fwd]
> type=friend
> secret=********
> username=691657
> host=fwd.pulver.com
> dtmfmode=inband
> context=home
> nat=yes
> canreinvite=no
> disallow=all
> allow=all
> ; END FWD1 ACCT
>
> [7890]
> type=friend
> host=192.168.2.29
> context=home
> secret=********
> callerid="OFFICE PHONE #2" <7890>
> mailbox=7890
> dtmfmode=rfc2833
> nat=0
>
> AND HERE IS MY EXTENSIONS.CONF FILE
>
> [general]
> static=yes
> writeprotect=no
> autofallthrough=yes
> clearglobalvars=no
> priorityjumping=no
>
> [globals]
> CONSOLE=Console/dsp
> PHONES1=SIP/7890 ; Phone 1 Def
> PHONES1VM=7890 ; Phone 1 VM Def
> FWDUSERID1=691657
> MYNAME1=My name
> MYPHONE1=691657
> TRUNKMSD=1 ; MSD digits to strip (usually 1 or 0)
>
> [fwd-forced-fwd1]
> ; Check to see if the called number starts with a "7" and
> ; if so, set the call parameters and bounce the call to the
> ; Free World Dialup SIP server.
> ;
> ; NOTE: Calls to unknown users will result in "invalid extension"
> ; message being played.
> ;
> exten => _7.,1,SetCallerID(${FWDUSERID1})
> exten => _7.,2,SetCIDName(${MYNAME1})
> exten => _7.,3,Dial(SIP/${EXTEN:1}@fwd)
> exten => _7.,4,Playback(invalid)
> exten => _7.,5,Hangup
>
> [from-sip-fwd1]
> exten => ${FWDUSERID1},1,Dial(${PHONES1},30,Ttm)
> exten => ${FWDUSERID1},2,Voicemail2(u${PHONES1VM})
> exten => ${FWDUSERID1},3,Hangup
>
>
> [dundi-e164-canonical]
> ;
> ; List canonical entries here
> ;
> ;exten => 12564286000,1,Macro(std-exten,6000,IAX2/foo)
> ;exten => _125642860XX,1,Dial(IAX2/otherbox/${EXTEN:7})
>
> [dundi-e164-customers]
> ;
> ; If you are an ITSP or Reseller, list your customers here.
> ;
> ;exten => _12564286000,1,Dial(SIP/customer1)
> ;exten => _12564286001,1,Dial(IAX2/customer2)
>
> [dundi-e164-via-pstn]
> ;
> ; If you are freely delivering calls to the PSTN, list them here
> ;
> ;exten => _1256428XXXX,1,Dial(Zap/g2/${EXTEN:7}) ; Expose all of 256-428
> ;exten => _1256325XXXX,1,Dial(Zap/g2/${EXTEN:7}) ; Ditto for 256-325
>
> [dundi-e164-local]
> ;
> ; Context to put your dundi IAX2 or SIP user in for
> ; full access
> ;
> include => dundi-e164-canonical
> include => dundi-e164-customers
> include => dundi-e164-via-pstn
>
> [dundi-e164-switch]
> ;
> ; Just a wrapper for the switch
> ;
> switch => DUNDi/e164
>
> [dundi-e164-lookup]
> ;
> ; Locally to lookup, try looking for a local E.164 solution
> ; then try DUNDi if we don't have one.
> ;
> include => dundi-e164-local
> include => dundi-e164-switch
> ;
> ; DUNDi can also be implemented as a Macro instead of using
> ; the Local channel driver.
> ;
> [macro-dundi-e164]
> ;
> ; ARG1 is the extension to Dial
> ;
> exten => s,1,Goto(${ARG1},1)
> include => dundi-e164-lookup
>
> ;
> ; Here are the entries you need to participate in the IAXTEL
> ; call routing system. Most IAXTEL numbers begin with 1-700, but
> ; there are exceptions. For more information, and to sign
> ; up, please go to www.gnophone.com or www.iaxtel.com
> ;
> [iaxtel700]
> exten =>
> _91700XXXXXXX,1,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel)
>
> ;
> ; The SWITCH statement permits a server to share the dialplain with
> ; another server. Use with care: Reciprocal switch statements are not
> ; allowed (e.g. both A -> B and B -> A), and the switched server needs
> ; to be on-line or else dialing can be severly delayed.
> ;
> [iaxprovider]
> ;switch => IAX2/user:[key]@myserver/mycontext
>
> [trunkint]
> ;
> ; International long distance through trunk
> ;
> exten => _9011.,1,Macro(dundi-e164,${EXTEN:4})
> exten => _9011.,n,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
>
> [trunkld]
> ;
> ; Long distance context accessed through trunk
> ;
> exten => _91NXXNXXXXXX,1,Macro(dundi-e164,${EXTEN:1})
> exten => _91NXXNXXXXXX,n,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
>
> [trunklocal]
> ;
> ; Local seven-digit dialing accessed through trunk interface
> ;
> exten => _9NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
>
> [trunktollfree]
> ;
> ; Long distance context accessed through trunk interface
> ;
> exten => _91800NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
> exten => _91888NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
> exten => _91877NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
> exten => _91866NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
>
> [international]
> ;
> ; Master context for international long distance
> ;
> ignorepat => 9
> include => longdistance
> include => trunkint
>
> [longdistance]
> ;
> ; Master context for long distance
> ;
> ignorepat => 9
> include => local
> include => trunkld
>
> [local]
> ;
> ; Master context for local, toll-free, and iaxtel calls only
> ;
> ignorepat => 9
> include => default
> include => parkedcalls
> include => trunklocal
> include => iaxtel700
> include => trunktollfree
> include => iaxprovider
> include => home
>
> ;
> ; You can use an alternative switch type as well, to resolve
> ; extensions that are not known here, for example with remote
> ; IAX switching you transparently get access to the remote
> ; Asterisk PBX
> ;
> ; switch => IAX2/user:password at bigserver/local
> ;
> ; An "lswitch" is like a switch but is literal, in that
> ; variable substitution is not performed at load time
> ; but is passed to the switch directly (presumably to
> ; be substituted in the switch routine itself)
> ;
> ; lswitch => Loopback/12${EXTEN}@othercontext
> ;
> ; An "eswitch" is like a switch but the evaluation of
> ; variable substitution is performed at runtime before
> ; being passed to the switch routine.
> ;
> ; eswitch => IAX2/context@${CURSERVER}
>
> [macro-stdexten];
> ;
> ; Standard extension macro:
> ; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well
> ; ${ARG2} - Device(s) to ring
> ;
> exten => s,1,Dial(${ARG2},20) ; Ring the interface,
> 20 seconds maximum
> exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on
> status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)
>
> exten => s-NOANSWER,1,Voicemail(u${ARG1}) ; If unavailable,
> send to voicemail w/ unavail announce
> exten => s-NOANSWER,2,Goto(default,s,1) ; If they press #,
> return to start
>
> exten => s-BUSY,1,Voicemail(b${ARG1}) ; If busy, send to
> voicemail w/ busy announce
> exten => s-BUSY,2,Goto(default,s,1) ; If they press #,
> return to start
>
> exten => _s-.,1,Goto(s-NOANSWER,1) ; Treat anything
> else as no answer
>
> exten => a,1,VoicemailMain(${ARG1}) ; If they press *,
> send the user into VoicemailMain
>
> [macro-stdPrivacyexten];
> ;
> ; Standard extension macro:
> ; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well
> ; ${ARG2} - Device(s) to ring
> ; ${ARG3} - Optional DONTCALL context name to jump to (assumes the
> s,1 extension-priority)
> ; ${ARG4} - Optional TORTURE context name to jump to (assumes the
> s,1 extension-priority)`
> ;
> exten => s,1,Dial(${ARG2},20|p) ; Ring the
> interface, 20 seconds maximum, call screening option (or use P for
> databased call screening)
> exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on
> status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)
>
> exten => s-NOANSWER,1,Voicemail(u${ARG1}) ; If unavailable,
> send to voicemail w/ unavail announce
> exten => s-NOANSWER,2,Goto(default,s,1) ; If they press #,
> return to start
>
> exten => s-BUSY,1,Voicemail(b${ARG1}) ; If busy, send to
> voicemail w/ busy announce
> exten => s-BUSY,2,Goto(default,s,1) ; If they press #,
> return to start
>
> exten => s-DONTCALL,1,Goto(${ARG3},s,1) ; Callee chose
> to send this call to a polite "Don't call again" script.
>
> exten => s-TORTURE,1,Goto(${ARG4},s,1) ; Callee chose
> to send this call to a telemarketer torture script.
>
> exten => _s-.,1,Goto(s-NOANSWER,1) ; Treat anything
> else as no answer
>
> exten => a,1,VoicemailMain(${ARG1}) ; If they press *,
> send the user into VoicemailMain
>
>
> [macro-vmessage] ;This will create a macro we will use in the dialling
> plan
> exten => s,1,VoiceMail2(u${ARG1})
> exten => s,2,Playback(groovy)
> exten => s,3,Playback(goodbye)
> exten => s,4,Hangup
>
> [demo]
> ;
> ; We start with what to do when a call first comes in.
> ;
> exten => s,1,Wait,1 ; Wait a second, just for fun
> exten => s,n,Answer ; Answer the line
> exten => s,n,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
> exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10
> seconds
> exten => s,n(restart),BackGround(demo-congrats) ; Play a
> congratulatory message
> exten => s,n(instruct),BackGround(demo-instruct) ; Play some
> instructions
> exten => s,n,WaitExten ; Wait for an extension to be dialed.
>
> exten => 2,1,BackGround(demo-moreinfo) ; Give some more information.
> exten => 2,n,Goto(s,instruct)
>
> exten => 3,1,Set(LANGUAGE()=fr) ; Set language to french
> exten => 3,n,Goto(s,restart) ; Start with the congratulations
>
> exten => 1000,1,Goto(default,s,1)
> ;
> ; We also create an example user, 1234, who is on the console and has
> ; voicemail, etc.
> ;
> exten => 1234,1,Playback(transfer,skip) ; "Please hold while..."
> ; (but skip if channel is not up)
> exten => 1234,n,Macro(stdexten,1234,${CONSOLE})
>
> exten => 1235,1,Voicemail(u1234) ; Right to voicemail
>
> exten => 1236,1,Dial(Console/dsp) ; Ring forever
> exten => 1236,n,Voicemail(u1234) ; Unless busy
>
> ;
> ; # for when they're done with the demo
> ;
> exten => #,1,Playback(demo-thanks) ; "Thanks for trying the demo"
> exten => #,n,Hangup ; Hang them up.
>
> ;
> ; A timeout and "invalid extension rule"
> ;
> exten => t,1,Goto(#,1) ; If they take too long, give up
> exten => i,1,Playback(invalid) ; "That's not valid, try again"
>
> ;
> ; Create an extension, 500, for dialing the
> ; Asterisk demo.
> ;
> exten => 500,1,Playback(demo-abouttotry); Let them know what's going on
> exten => 500,n,Dial(IAX2/guest at misery.digium.com/s at default) ; Call
> the Asterisk demo
> exten => 500,n,Playback(demo-nogo) ; Couldn't connect to the demo site
> exten => 500,n,Goto(s,6) ; Return to the start over message.
>
> ;
> ; Create an extension, 600, for evaulating echo latency.
> ;
> exten => 600,1,Playback(demo-echotest) ; Let them know what's going on
> exten => 600,n,Echo ; Do the echo test
> exten => 600,n,Playback(demo-echodone) ; Let them know it's over
> exten => 600,n,Goto(s,6) ; Start over
>
> ;
> ; Give voicemail at extension 8500
> ;
> exten => 8500,1,VoicemailMain
> exten => 8500,n,Goto(s,6)
> ;
> ; Here's what a phone entry would look like (IXJ for example)
> ;
> ;exten => 1265,1,Dial(Phone/phone0,15)
> ;exten => 1265,n,Goto(s,5)
>
> ;[mainmenu]
> ;
> ; Example "main menu" context with submenu
> ;
> ;exten => s,1,Answer
> ;exten => s,n,Background(thanks) ; "Thanks for calling press 1
> for sales, 2 for support, ..."
> ;exten => s,n,WaitExten
> ;exten => 1,1,Goto(submenu,s,1)
> ;exten => 2,1,Hangup
> ;include => default
> ;
> ;[submenu]
> ;exten => s,1,Ringing ; Make them comfortable with
> 2 seconds of ringback
> ;exten => s,n,Wait,2
> ;exten => s,n,Background(submenuopts) ; "Thanks for calling the
> sales department. Press 1 for steve, 2 for..."
> ;exten => s,n,WaitExten
> ;exten => 1,1,Goto(default,steve,1)
> ;exten => 2,1,Goto(default,mark,2)
>
> [default]
> ;
> ; By default we include the demo. In a production system, you
> ; probably don't want to have the demo there.
> ;
> include => demo
>
> ;
> ; Extensions like the two below can be used for FWD, Nikotel, sipgate
> etc.
> ; Note that you must have a [sipprovider] section in sip.conf whereas
> ; the otherprovider.net example does not require such a peer definition
> ;
> ;exten => _41X.,1,Dial(SIP/${EXTEN:2}@sipprovider,,r)
> ;exten =>
> _42X.,1,Dial(SIP/user:passwd@${EXTEN:2}@otherprovider.net,30,rT)
>
> ; Real extensions would go here. Generally you want real extensions to
> be 4 or 5
> ; digits long (although there is no such requirement) and start with a
> single
> ; digit that is fairly large (like 6 or 7) so that you have plenty of
> room to
> ; overlap extensions and menu options without conflict. You can alias
> them with
> ; names, too and use global variables
>
> ;exten => 6245,hint,SIP/Grandstream1&SIP/Xlite1,Joe Schmoe ; Channel
> hints for presence
> ;exten => 6245,1,Dial(SIP/Grandstream1,20,rt) ; permit transfer
> ;exten => 6245,n(dial),Dial(${HINT},20,rtT) ; Use hint as listed
> ;exten => 6245,n,Voicemail(u6245) ; Voicemail (unavailable)
> ;exten => 6245,s+1,Hangup ; s+1, same as n
> ;exten => 6245,dial+101,Voicemail(b6245) ; Voicemail (busy)
> ;exten => 6361,1,Dial(IAX2/JaneDoe,,rm) ; ring without time limit
> ;exten => 6389,1,Dial(MGCP/aaln/1 at 192.168.0.14)
> ;exten => 6394,1,Dial(Local/6275/n) ; this will dial ${MARK}
>
> ;exten => 6275,1,Macro(stdexten,6275,${MARK}) ; assuming ${MARK} is
> something like Zap/2
> ;exten => mark,1,Goto(6275|1) ; alias mark to 6275
> ;exten => 6536,1,Macro(stdexten,6236,${WIL}) ; Ditto for wil
> ;exten => wil,1,Goto(6236|1)
> ;
> ; Some other handy things are an extension for checking voicemail via
> ; voicemailmain
> ;
> ;exten => 8500,1,VoicemailMain
> ;exten => 8500,n,Hangup
> ;
> ; Or a conference room (you'll need to edit meetme.conf to enable this
> room)
> ;
> ;exten => 8600,1,Meetme(1234)
> ;
> ; Or playing an announcement to the called party, as soon it answers
> ;
> ;exten = 8700,1,Dial(${MARK},30,A(/path/to/my/announcemsg))
> ;
> ; For more information on applications, just type "show applications"
> at your
> ; friendly Asterisk CLI prompt.
> ;
> ; 'show application <command>' will show details of how you
> ; use that particular application in this file, the dial plan.
> ;
>
> [dialout-fwd1]
> include => fwd-forced-fwd1
> include => from-sip-fwd1
>
>
> ; --------------------------
> ; DEFINE EXTENSIONS
> ; --------------------------
>
> [home]
> include => dialout-fwd1
> ; Next, add an extension for voicemail.
> ; now if we dial 8, we can check voicemail.
> ;
> exten => 8,1,VoiceMailMain2
> exten => 8,2,Hangup
> ;
> ; Line 1
> ;
> exten => 7890,1,Dial(${PHONES1},20,Ttm)
> exten => 7890,2,Macro(vmessage,${PHONES1VM})
> exten => 7890,3,Hangup
>
>
> ; --------------------------
> ; END DEFINE EXTENSIONS
> ; --------------------------
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
=================================
Joshua Abbott, Support Technician
http://www.successfulhosting.com/
Direct Line: PENDING
Phone: (866) 494-5096 x1207
E-Fax: (419) 858-3241
Alt E-Fax: (801) 217-1123
jabbott at SuccessfulHosting.com
=================================
The Success behind your web site!
=================================
More information about the asterisk-users
mailing list