[Asterisk-Users] RxFax - IAX (Telappliant)

[Steve Ducat]

I am using Telappliant PSTN -> VOIP Goegraphic number. They are
passing me the call to my * box by IAX.

I have configured spandsp, libtiff, etc. It will pick up the call,
start to talk to the fax machine but at the same point every time it
hangs on and then hangsup.

Here is my iax.conf:

[0207100XXXX]
type=friend
username=0207100XXXX
context=default
disallow=all
allow=ulaw

Here is the output when receiving the fax:

-- Accepting unauthenticated call from 217.14.132.185, requested
format = 8, actual format = 4
-- Executing RxFAX("IAX2/0207100XXXX at 217.14.132.185:4569/1",
"/var/spool/asterisk/incoming/2131665134.tif") in new stack
Changed from phase 0 to 1
Slow carrier up
Slow carrier down
Start receiving document
Changed from phase 1 to 4
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
Slow carrier up
<<< TSI: 43 31 37 35 32 20 30 38 35 20 31 37 31 20 34 34 20 20 20 20 20
TSI without final frame tag
Remote fax gave TSI as: "44 171 580 2571"
<<< DCS: 83 00 86 f0 80 80 00
DCS with final frame tag
In state 9
DCS:
Can receive fax
Selected data signalling rate: V.29, 9600bps
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Minimum scan line time: 0ms
Minimum scan line time for higher resolutions: T15.4 = T7.7
Get at 9600
Changed from phase 3 to 5
Fast carrier up
Training failed (sequence failed)
Fast carrier training failed
Fast carrier down
Fast carrier up
Coarse carrier frequency 1699.94 (64)
Training error 7.908183
Training succeeded (constellation mismatch 12.376823)
Fast carrier trained
Fast carrier down
Changed from phase 5 to 4
Start rx document - compression 2
Start rx page
>>> CFR: 84
HDLC underflow in state 5
Post trainability
Changed from phase 4 to 5
Fast carrier up
Coarse carrier frequency 1700.03 (64)
Training error 7.017459
Training succeeded (constellation mismatch 10.231490)
Fast carrier trained
   -- Hungup 'IAX2/0207100XXXX at 217.14.132.185:4569/1'

Any help would be appreciated.

Steve