[Asterisk-Users] zapata.conf for a BT phone line with a TDM422P

[Steve Dobson]

Hi guys

Forgive the newbie question but I am setting up my first * system :-)

I live in the UK with two standard BT phone lines.  The hardware used
is a TDM400P with two FXO and two FXS daughter boards.

Currently only one FXO and one FXS line is used during testing.

Incoming calls work fine, as do the phones plugged into the system.

However outbound calls do not work.  The number is dialled, and some
attempt is made to send the number, but I get the old BT "the number
you have dialled as not been recognised" message.

I had this problem years ago with my old Psion 3 - it could be used
to tone dial numbers using its speaker and it took me a while get it
to work by slowing the dialling down.  I'm hoping that the same is
true now.

Can someone explain what the different timing settings are.  What,
is wink and flash?  Is debounce the time between each tones?

Of course if someone has a working zapata.conf for TDM400P on a BT
land line then that would be really, really useful :-)

Ta in advance
Steve

-- 
Sex dumps core
(Sex is a Simple editor for X11)
	-- Seen on debian bugtracking
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050824/e23475a0/attachment.pgp