[Asterisk-Users] Polycom Default .cfg

[Jeremy Melanson]

I'm using Firmware 1.5.2. On my phone the appropriate settings are under
Menu/Settings/Advanced/Admin Settings/Network Configuration/Server Menu.

Make sure that 'Server Type' is 'FTP, and that 'Server User' and 'Server
Password' are correct. I don't recommend using an anonymous user, but
you may be able to use it by specifying 'anonymous' or 'ftp' for your '
Server User'. I have not verified that this works.

Also, if you are registering your phone's IP address via DHCP, you can
specify your FTP server as a 'TFTP Server' entry in your DHCP Server's
config. Otherwise, make sure that 'Server Address' is correct on the
phone.

-----
Jeremy

On Wed, 2005-08-24 at 08:44 -0500, Jimm Shepard wrote:
> I am using the Polycom IP500 and had it working with my * server but
> upon moving offices something happened.  I have a FTP server set up
> but I cannot get the phone to recognize it.  I have a static IP for my
> * box.  Can someone tell me what the setting should be on the phone to
> download from the FTP server?  Do I have to use a User/Password or can
> I just leave them blank for anonymous?  I can see the files from
> another computer so I know the FTP server is working.
> 
>  
> 
> Right now the phone is in a never ending loop saying it can’t find the
> boot server and there’s an error loading the <MAC>.cfg file.  Is there
> any way to restore the factory <mac>.cfg without a boot server? 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users