[Asterisk-Users] Cisco 7940 + no audio after MOH

[Ron Wellsted]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wed, 24 Aug 2005, Julien wrote:

> Hi,
>
> I use * release 1.0.9 with differents phones and softphone, i've got a 
> problem with my Cisco 7940G (last SIP Firmware).
> Sometimes, when i but a call on hold, the caller has got the music, but when 
> i "resume" the call, then the caller does not hear me (and nothing at all)... 
> I must wait for 10, 20, sometimes 60 seconds before he could hear me again.
> Any body already had this problem ?
> I use G711u codec for the cisco and i had the probem with a IAX client (using 
> GSM) a PSTN caller (through my SPA3K using 711u) ...
> Thanks a lot ;)
>
> Julien.
>
>

Is the 794G configured to use a VLAN ?  I had a similar problem with VLAN 
and ARP packets.  I got around this by not using VLANS but putting the 
phone on a separate subnet (with QoS on the phone subnet).


- -- 
Ron Wellsted
http://www.wellsted.org.uk
ron at wellsted.org.uk
FWD: 519961
N 52.567623, W 2.137621
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)

iQEVAwUBQwxK/ktP/KMNOfRbAQLSWAf/XhXZdD60KukuTT0B59u6iefG0m94q2nm
SNqoZ+9PHrvYmVCRVC4zlH1JQUyMi7w4oed4JHqTAgK0XATEOFXbvjJuiZkNaWnC
hl3iCSD3PiPjGkdusvOy/myQzZjCrAZ1DVVSA9Jn0bjtPF9CrEr4zfo9vkQz1ZV9
+mpMJgZPMV6lZ8CTR2ylS6mD/QnqP1sxHPZu2Fyr8ILFpH7gzyCeVg8LT4+IkDNa
Es5o4UxQm5lTTnlvZ562dho/GZXflm2FH5CT1lRecmFD3qlulmqC1Ih6kTxWkEZ7
+QLaZrTBiXV4dkF2xtr9NhmvtozpsqvQtBnTiQR/q3Y7uv165pgVFw==
=vXem
-----END PGP SIGNATURE-----