[Asterisk-Users] HDLC/Zaptel/Kernel 2.6.11(.9)

[Matt Schulte]

Ok, thanks for the info.. What about the other problem(s) I'm having?
Any thoughts?

	Matt 

-----Original Message-----
From: Kristian Kielhofner [mailto:kris at krisk.org] 
Sent: Tuesday, August 23, 2005 1:07 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] HDLC/Zaptel/Kernel 2.6.11(.9)

Matt Schulte wrote:
> All,
> 
> 	I'm having a heck of a time getting hdlc to work on kernel
> 2.6.11.9 .. I compiled hdlc, hdlc_gen, hdlc_cisco, hdlc_raw, into the 
> kernel (note into, and not 'modules').
> 
> System comes up, I configured zaptel.conf
> 
> span=1,0,0,esf,b8zs
> nethdlc=1-24
> 
> modprobe wct4xxp
> ztcfg
> 
> sethdlc hdlc0 cisco
> ifconfig hdlc0 up
> 
> All of this works fine, believe it or not. I have a T1 cross plugged 
> into a cisco 2600 using out of the box configuration. I cannot get 
> line protocol to come up on the cisco. Suggestions? Also, doing a 
> ifconfig hdlc0 down does a core dump of the kernel, lol. Is this
normal?
> 
> I'm using sethdlc 1.15 as mentioned in the wiki instructions.

Matt,

	Normal, yes, good, no.  I have experienced the exact same
behavior on a number of machines, and so have many others.  The
certainly seems to be in zaptel (zt_net_stop, if I recall), but I don't
know if it is "priority" or not...


--
Kristian Kielhofner
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users