[Asterisk-Users] Asterisk & Alcatel PBX

[Mark Phillips]

Make sure you have your Alcatel's analogue port setup for fxo so that 
you can plug the X100P's fxs port (line) into it.

As for the ringing, that's artificially gernerated by the Alcatel.

You do have the Zaptel drivers compiled and loaded right? What do you 
get when you do zap show channels?

Also, with only one analogue line into the * server who are you 
expecting the Alcatel users to address the SIP phones?

Mark

Trasschaert Karl wrote:
> Hello everybody,
> 
> I just buy a X101p clone and i'm new in asterisk.
> 
> Here is my configuration :
> 
> ISDN line ---- Alcatel ----PSTN ext 68-----Asterisk with X101p clone 
> ------sip phone ext 200 - 203
>                      |||
>                  ISDN phones ext 60-67
> 
>> From sip phone to ext 60-67 it works. 9+extnumber
>> From sip phone to Land lines it works. 9+0+phone number
> 
> 
>> From ext 60-67 to sip doesnt works. simply dial 68. I only ear the 
>> ringing 
> 
> tone in the fone but no SIP phone ring.
> Of course from landline to sip it doesn't works.
> I've dial 7777 fro a sip phone to simulate incoming call and the sip 
> phone ring.
> If i replace the asterisk server by a simple analog phone, it ring.
> Apparently, the asterisk server doesn't unhook.
> 
> I also activate the debug
> notting happen when i try to make a call.
> 
> I already exchange the card, same problem.
> 
> I think it's a configuration problem but i don't know where.
> 
> Did someone can help me?
> 
> Thx
> 
> jme
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 

-- 

Mark, G7LTT/KC2ENI
Randolph, NJ
http://www.g7ltt.com