[Asterisk-Users] ZT_CHANCONFIG failed on channel 1 - WAS WORKING!!

[Rich Adamson]

Seems the latest distro's have changed the layout of the linux source tree
needed to compile the zaptel stuff. I'm using FC3, upgraded the kernel, and
have the same issue. Was able to install new sources, but they too are
completely different tree layout compared to earlier stuff. The same is
apparently happening with other distro's as well.

There has been a bug item open for last several weeks relative to reworking
the make files for these items.

------------------------
> 
> That suggestion is possibly on the right track.  It made me remember that - 
> although I'm not using Fedora, but SuSE 9.3, that it went through an 
> automatic network update just recently.  After that, I tried updating the 
> Zaptel files from CVS and recompiling everything, but to no avail.  The 
> same error still occured.  I eliminated hardware by swapping out a working 
> TDM400 with the same FXS/FXO configuration.  The same error occurs.  The 
> SuSE update may have moved some of the required files, although there are 
> no complaints during the build and I can't determine what may have moved.
> 
> I have still present and installed Bison 1.875, OpenSSL and zlib-devel, and 
> of course Linux source for this SuSE disto.  I'm completely faklempt!  Can 
> someone shed light on this delima??   Thanks so much if you can.  I want my 
> As-terisk back!!!  It was working, damnit.   Thanks, Matt for your suggestion.
> 
> Scott
> 
> At 09:30 PM 8/19/2005, you wrote:
> >sbrown at andersonis.com wrote:
> > >
> > > Hi:
> > > I hope that someone can help with this problem that came up suddenly. I
> >
> >Did you upgrade Fedora Core?
> >
> >Check if the udev files still contain the required entries (normally fedora
> >copies the old ones to 50-udev-rules.old and makes new ones).