[Asterisk-Users] tdm400 and hfc card problem after ztcfg

[Giorgio Incantalupo]

HI,
I installed a tdm440p and a monoBRI in the same Dell machine (PowerEdge 
600SC) but after typing ztcfg -vv the server screen is filled with tons 
of the following lines:
Aug 19 11:54:42 pippo kernel: zaphfc: bchan rx fifo not enough bytes to 
receive! (z1=3200, z2=3193, wanted 8 got 7), probably a buffer overrun.
Aug 19 11:54:44 pippo kernel: zaphfc: dropped audio (z1=6972, z2=6955, 
wanted 8 got 17, dropped 9).

while in the linux log I see:
Aug 19 11:54:36 pippo kernel: PCI: Enabling device 00:04.0 (0000 -> 0003)
Aug 19 11:54:36 pippo kernel: zaphfc: CCD/Billion/Asuscom 2BD0 
configured at mem 0xe0ffd000 fifo 0xdef88000(0x1ef88000) IRQ 20 HZ 100
Aug 19 11:54:36 pippo kernel: zaphfc: Card 0 configured for TE mode
Aug 19 11:54:36 pippo devfsd[145]: error copying: "/lib/dev-state/zap/1" 
to "/dev/zap/1"
Aug 19 11:54:36 pippo devfsd[145]: error copying: "/lib/dev-state/zap/2" 
to "/dev/zap/2"
Aug 19 11:54:36 pippo devfsd[145]: error copying: "/lib/dev-state/zap/3" 
to "/dev/zap/3"
Aug 19 11:54:36 pippo kernel: zaphfc: 1 hfc-pci card(s) in this box.
Aug 19 11:54:39 pippo kernel: Freshmaker version: 71
Aug 19 11:54:39 pippo kernel: Freshmaker passed register test
Aug 19 11:54:39 pippo kernel: Uhhuh. NMI received for unknown reason 31.
Aug 19 11:54:39 pippo kernel: Dazed and confused, but trying to continue
Aug 19 11:54:39 pippo kernel: Do you have a strange power saving mode 
enabled?
Aug 19 11:54:39 pippo kernel: Module 0: Installed -- AUTO FXS/DPO
Aug 19 11:54:39 pippo kernel: Module 1: Installed -- AUTO FXO (FCC mode)
Aug 19 11:54:39 pippo kernel: Module 2: Installed -- AUTO FXO (FCC mode)
Aug 19 11:54:39 pippo kernel: Module 3: Installed -- AUTO FXO (FCC mode)
Aug 19 11:54:39 pippo devfsd[145]: error copying: "/lib/dev-state/zap/4" 
to "/dev/zap/4"
Aug 19 11:54:39 pippo devfsd[145]: error copying: "/lib/dev-state/zap/5" 
to "/dev/zap/5"
Aug 19 11:54:39 pippo devfsd[145]: error copying: "/lib/dev-state/zap/6" 
to "/dev/zap/6"
Aug 19 11:54:39 pippo devfsd[145]: error copying: "/lib/dev-state/zap/7" 
to "/dev/zap/7"
... snip ...

Anybody has any idea about what "error copying" means??

TIA

Giorgio

-- 
____________________________________________________________________

GIORGIO INCANTALUPO
Tel. +39 02 9350 4780 (104)

FG&A Software
20017 Rho - Via Puccini, 8

E-Mail :
gincantalupo at fgasoftware.com
Internet:
http://www.fgasoftware.com