[Asterisk-Users] TDM04B, trunk group

[kalezade at boun.edu.tr]

Quoting Sascha Ferley <Sascha.Ferley at infineon.net>:

> Thanks for the reply
> 
> The phone lines here are already setup in a hunt group from the telco
> provider. The reason I asked was that I saw somewhere, which I can't seem to
> find right now, that one could configure all 4 lines into 1 group, like the
> channels in a PRI. 
> 
> This was basically what I was trying to do.
> 
>  
> 
> S.
> 
>   _____  
> 
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of OMS
> Sent: August 17, 2005 3:33 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] TDM04B, trunk group
> 
>  
> 
> I think it should be simple if I understand your question correctly. 
> 
>  
> 
> Make 4 trunks ZAP/g0, ZAP/g1, ZAP/g2,ZAP/g3 in AMP.
> 
>  
> 
> In outbound routing make outbound routing with almost all dial patterns
> 
> Select the trunk sequence starting from the last one in the hunt group.
> 
> If your main number is connected to ZAP/g0, it should be last in the
> sequence.
> 
>  
> 
> In your scenario if will be helpful to get a SIP outbound route for long
> distance. This will reduce your cost and load on ZAP trunks.
> 
>  
> 
> Obaid.
> 
>  
> 
> ----- Original Message ----- 
> 
> From: Sascha <mailto:Sascha.Ferley at infineon.net>  Ferley 
> 
> To: 'Asterisk Users Mailing List - <mailto:asterisk-users at lists.digium.com>
> Non-Commercial Discussion' 
> 
> Sent: Wednesday, August 17, 2005 4:37 PM
> 
> Subject: [Asterisk-Users] TDM04B, trunk group
> 
>  
> 
> Hi, 
> 
> I am just trying to figure out how to setup a TDM04B card for
> incoming/outgoing calls. I have 4 lines, which are provided as a rotary
> trunk group, currently hooked into a Nortel system, which asterisk will
> replace.  I have setup a Dell 1800 (Tower) system with the TDM04B card,
> which seems to work. 
> 
>  
> 
> The question is how do I set it up that all 4 lines are part of a trunk
> group, such that all 4 lines can be used for incoming aswell as outgoing
> calls?
> 
>  
> 
> I am using asterisk at home 1.4. 
> 
>  
> 
> Please let me know
> 
> Thanks
> 
> S.
> 
> 
>   _____  
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>