[Asterisk-Users] Re: Called Party Identification on Polycom IP501

[Anthony Rodgers]

Hi Damon,

It's not working SIP to SIP - I am wondering if there is something I am 
missing in my * config.

What I see on the Polycom display is:

To:2471
2471

Called party entry in sip.conf (calling party entry is identical):

[2471]
type=friend
context=internal
callerid=C***** M**** <2471>
secret=********
host=dynamic
nat=no
canreinvite=no
dtmfmode=rfc2833
mailbox=2471 at default

The called party entry in phone2471.cfg (calling party entry is 
identical):

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!-- Example Per-phone Configuration File -->
<!-- $Revision: 1.59 $  $Date: 2004/05/22 00:50:41 $ -->
<phone2471>
   <reg reg.1.displayName="C***** M****" reg.1.address="2471" 
reg.1.label="2471" reg.1.type="private" reg.1.auth.userId="2471" 
reg.1.auth.password="********"/>
   <msg msg.bypassInstantMessage="1">
   <mwi msg.mwi.1.subscribe="" msg.mwi.1.callBackMode="contact" 
msg.mwi.1.callBack="*98"/>
   </msg>
</phone2471>

Am I missing anything?

Regards,

Anthony

> That is very dependent on how the call egresses from *, ISDN, POTS, 
> SIP,
> ???
> Who are you calling?
>
>
> If I recall correctly it will work when you call another extension on
> the * box, but the signaling for that info does not exists in
> PRI/T1/POTS, so it is not an * issue if you area calling out, * cant 
> get
> the info from the telco, so * cant send it to the phone.