[Asterisk-Users] TDM400P Card (Rev G) with bad FXS module?

[Paul Belanger]

lspci -v what output do you get?  Also, what OS are you using?

Jeff Borders wrote:
> I think I have a bad FXS module on my TDM400P.
> 
> Channel map:
>  >>
>  >> Channel 01: FXO Kewlstart (Default) (Slaves: 01)
>  >> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
>  >>
>  >> 2 channels configured.
>  >> ZT_CHANCONFIG failed on channel 1: No such device or address (6)
> 
> The zaptel loads ok, but the wctdm reports No such device or address and 
> stays loaded.  The TDM400P is rev G if that means anything.  When I do a 
>  ls -l /proc/zaptel/* there's nothing there.
> 
> I'm pretty sure my configs are correct.  I copied them verbatim from 
> http://www.asteriskguru.com/tutorials/wildcard_tdm400p.html and my card 
> is setup the same way with the green FXS Module in TEL1 and the red FXO 
> module in TEL2.  (I believe thats the standard way they come from 
> Digium.)  I purchased this probably two years ago.
> 
> I've tried both the stable zaptel and CVS zaptel.  I tried moving the 
> modules to 3 and 4 (and changed everything accordingly).  I even tried 
> this:
> 
> Comment out this line on zaptel/zconfig.h and recompile zaptel.
> 
> /*
>   * Uncomment if you happen have an early TDM400P Rev H which
>   * sometimes forgets its PCI ID to have wcfxs match essentially all
>   * subvendor ID's
>   */
> /* #define TDM_REVH_MATCHALL */
> 
> This is just a basic test setup for my home.  I want to get an analog 
> phone and 2 Cisco 7910 phones working.  Any help would be appreciated.
> Jeff Borders
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
>