[Asterisk-Users] One more newbie question

[Sean Rima]

Tom Rymes wrote:
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com 
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
>> Sean Rima
>> Sent: Saturday, August 13, 2005 8:50 AM
>> To: asterisk-users at lists.digium.com
>> Subject: [Asterisk-Users] One more newbie question
>>
>>
>> Ok, I am going for A at H with the CentOS iso disk. Installed 
>> and just checking a few things out.
>>
>> My other question is this, which I forgot to ask before. We 
>> have no Broadband here and more than likely will never have, 
>> so I am just looking at building Asterisk to handle inbound 
>> and outbound calls, at home via a ISDN card and for my hotel 
>> job via a PSTN line setup. Is this very complicated to setup or not?
>>
>> Sean
> 
> This is not that difficult. The first question you need to answer is
> whether you want to use a dedicated circuit (E1/T1/PRI) or multiple
> copper lines. This mostly depends on the call volume that you will be
> handling. Depending on your choice, you can install either a Sangoma or
> a Digium card to handle a dedicated circuit or you can use a Digium
> TDM400B card or a PSTN gateway to connect to your POTS phone lines.
> 

For my own needswhich is the primary one, it will just be connected to
one channel of the ISDN circuit, the other channel is taken by the PC
connection to the net.

I have seen a web site that deals with a lot of my questions so I will
be reading it in some detail

Sean
-- 
ICQ: 679813    FidoNet: 2:263/950
Jabber: tcob1 at jabber.org AOL: tcobone
Vodafone Messenger: thecivvie
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 2793 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050813/55156020/smime.bin