[Asterisk-Users] TE205P installation problem - ZT_SPANCONFIG failed on span 1

[Cavanna, Richard]

Checked modules and wct4xxp and zaptel are loaded. (if you check the makefile wct2xxp is an alias for wct4xxp)

Then did a lspci and it is not sharing any IRQs

Now I am doing a zttest and it hangs on " Opened pseudo zap interface, measuring accuracy..."

Richard 
------------------------------


have you checked if the card is recognized by the kernel
...loaded the needed module for the card

to see which modules are actually loaded: lsmod
to see which pci-cards are recognized by the kernel: lspci
...the digium cards are usually detected as an unknown network device

the needed module should be "wct2xxp" - maybe wct4xxp will do this as well
modules should be installed within /lib/modules/YOUR_KERNEL_VERSION/misc/

++++ Wichtige Vorabinformation ++++
b&w computer bezieht am 01.09.2005 neue Geschäftsräume. Unsere neue Adresse+Rufnummer: 
b&w computer
Fangdieckstr. 64
(1. Stock)
22547 Hamburg
T: +49 40 / 49 296 - 0
F: +49 40 / 49 296 - 100 

------------------------------