[Asterisk-Users] Re: Panasonic KX-TD500

[Alex Ternero]

Hi

I have a connection with Panasonic TDA200.

1. For echo,,, echocancel=yes, must be before the channel definition of the
PRI.

One question

>From Panasonic extensions can call to SIP Phones????


Alex

-----Mensaje original-----
De: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]En nombre de Guy C.
Guckenberger
Enviado el: martes, 19 de julio de 2005 18:45
Para: Asterisk Users Mailing List - Non-Commercial Discussion
Asunto: RE: [Asterisk-Users] Re: Panasonic KX-TD500


This is good info.  Has anyone else had this success? Can anyone address
the ECHO issue?


Thanks


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Nenad
Radosavljevic
Sent: Tuesday, July 19, 2005 1:58 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Re: Panasonic KX-TD500


We have Panasonic D500 and Asterisk with TE110P hybrid setup
successfully 
and it is possible to route DID to a PRI card in D500 if it is set up as
EXT 
card, and extension "number" of PRI card is defined for example as 2XX.
This 
gives you opportunity to have extensions 200 - 299 routed to PRI
interface 
in Panasonic D500 and after that setting up DID routing is easy.

On the other hand, in that configuration we have an echo problem with
the 
calls that entered Panasonic through the first PRI card connected to
Telco, 
and that got picked up by any EXT of Panasonic, and then got transferred
to 
the Asterisk extensions which are SIP phones (over that second PRI
interface 
in D500 connected to a TE110P).

Also we have a problem with SpanDSP as a FAX in that configuration (call
to 
a FAX DID on Asterisk ends after a 3-4 seconds).

Both this issues don't happen when the Asterisk is connected directly to
a 
Telco.

Regards,
                Nenad



> On Mon, 18 Jul 2005, Guy C. Guckenberger wrote:
>
>> Anyone have any luck with connecting Asterisk to the Panasonic
KX-TD500.
>> I have Asterisk connected via crossover to the TE110P. We are able to
>> make internal calls into the Asterisk Box but the PBX vendor (I know
>> nothing about the KX-TD500) tells us it is not possible route DID
over
>> the trunk. I find this hard to believe.  Anyone have any luck with
this?
>
> It depends on what T1/E1 card you have in the Panasonic, I think. It
> most certainly depends on what you are trying to accomplish.
>
> On the 500 it _is_ possible to set up a dialplan that will route some
> extensions out over a PRI link. That is one of the qualitative
differences
> between the KX-TD1232/KX-TD816 and the KX-TD500.
>
> So, what kind of trunk card do you have in the Panasonic and what do
you
> expect it to do?
>
> Peter



_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 3344 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050810/398278a2/winmail.bin