[Asterisk-Users] Asterisk to PSTN

[altus]

What about a PRI/BRI solution
We have a few with the voicetronix openline 4 cards and they work ok
But the PRI solution work better.We have a 4 port sangoma configured
like that.If I recall you set it to pri_net instead of pri_cpe and you
use a cross cable

On Tue, 2005-08-09 at 10:59 -0700, Edwin Lam wrote:
> hi folks.
> 
> i'm planning to connect * to 120 POTS line. i've done some research
> on FXO cards but unfortunately most manufacturers only make 4 ports/card.
> the most i've found is 12 ports. so do i have to get 10 of these cards
> and setup 3 Asterisk servers (assuming each have 4 free PCI slots) link
> them together with some insane dialplan? or is there an easier way?
> 
> any suggestions? comments? remarks? parameters?
> thx.
-- 

Thanks
Altus Snyman
Stormcorp Network Solutions
+27 11 8071141 exten 301