[Asterisk-Users] ISDN DID

[Matt Fredrickson]

On Tue, Aug 09, 2005 at 05:20:15PM -0500, Panitaxx wrote:
> thanks for your response. here is the log of one call:
> 
> Enabled debugging on span 1
> 
> Asterisk*CLI> 
> 
> < Protocol Discriminator: Q.931 (8)  len=33
> < Call Ref: len= 2 (reference 72/0x48) (Originator)
> < Message type: SETUP (5)
> < [a1]
> < Sending Complete (len= 1)
> < [04 03 90 90 a3]
> < Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer
> capability: 3.1kHz audio (16)
> <                              Ext: 1  Trans mode/rate: 64kbps,
> circuit-mode (16)
> <                              Ext: 1  User information layer 1: A-Law (35)
> < [18 03 a9 83 8d]
> < Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,
> Exclusive Dchan: 0
> <                        ChanSel: Reserved
> <                       Ext: 1  Coding: 0   Number Specified   Channel Type: 3
> <                       Ext: 1  Channel: 13 ]
> < [1e 02 84 83]
> < Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard
> (0) 0: 0   Location: Public network serving the remote user (4)
> <                               Ext: 1  Progress Description: Calling
> equipment is non-ISDN. (3) ]
> < [6c 0b 00 83 39 31 35 34 35 31 39 30 30]
> < Calling Number (len=13) [ Ext: 0  TON: Unknown Number Type (0)  NPI:
> Unknown Number Plan (0)
> <                           Presentation: Presentation allowed of
> network provided number (3) '915451900' ]
> -- Making new call for cr 72
> -- Processing Q.931 Call Setup
> -- Processing IE 161 (cs0, Sending Complete)
> -- Processing IE 4 (cs0, Bearer Capability)
> -- Processing IE 24 (cs0, Channel Identification)
> -- Processing IE 30 (cs0, Progress Indicator)
> -- Processing IE 108 (cs0, C
> alling Party Number)
>     -- Going to extension s|1 because of Complete received

I don't see a number specified here.  Do you have overlapdial=yes enabled?

-- 
Matthew Fredrickson