[Asterisk-Users] Asterisk to PSTN

[Bryce Chidester]

On Tue, 2005-08-09 at 12:54 -0700, Edwin Lam wrote:
> i guess the way to go is using channel banks to convert those to E1 then
> connect Asterisk that way.
> 
> further research, how about using these:
> http://www.welltech.com.tw/product_e_03.htm
> will that work?

Sure, that would work, all 20 of them, which considering they only
support 10Mbit ethernet may get kind of crowded (depending on any other
traffic and hardware). I think the channel bank route will be the best
overall and quite probably cheaper and easier to maintain. My experience
is that most channel banks out there are T1 interface (24 channels), but
there are some E1 channel banks too which you would only require 4 of.

-- 
-Bryce
bryce at rhinoequipment.com

NOTICE: The views expressed in this e-mail do not neccesarily reflect
those of my employer, this company, or its employees. This is a personal
e-mail and as such, the opinions expressed are my own.