[Asterisk-Users] Detecting hangup - TDM400P / X100P

[Tony Davidson]

The setting for Australia looks correct so that means I'm not setting 
the country code correctly, despite what I thought.

How can I determine if Asterisk has the correct country code?  (I did 
try to check this again on the Wiki but it's down at the moment :(

tony

David Phelan wrote:

>Have a look at the indications.conf file
>
>Dave
> 
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tony Davidson
>Sent: Tuesday, 9 August 2005 8:17 AM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: [Asterisk-Users] Detecting hangup - TDM400P / X100P
>
>I've searched the Wiki and this forum with little success.  I have a TDM400P
>in my server which functions fine. Except it will continue ringing about 3
>times after hangup.  I.e. it's failing to detect the hangup tone.
>
>I was previously running a Sipura 3000 and had the same issue.  After
>researching and some timely assistance I was able to determine the hangup
>tones applicable to Australia and input it into the Sipura.  How do I input
>these tones into the TDM400P as being a hangup?
>
>TIA,
>tony
>  
>