[Asterisk-Users] Cisco 7206 and Sample configs (Newbie)

[Ronnie Tartar]

Perefect, thanks for the info.

Thanks

----- Original Message ----- 
From: "Greg Oliver" <goliver at cistera.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Monday, August 08, 2005 13:30
Subject: Re: [Asterisk-Users] Cisco 7206 and Sample configs (Newbie)


> Using 'dial-peer voice XXXX voip' and 'dial-peer voice XXXX pots' is
> what you are looking for on the 7206..
>
> Use sip, and just use dial(SIP/${EXTEN}@ip.of.your.7206) to make calls
> go out..
>
> search on cisco for dial-peer syntax and requirements - plenty of
> examples out there.
>
> -Greg
>
> On Mon, 2005-08-08 at 12:48 -0400, Ronnie Tartar wrote:
>> Not really sure, I'd like to set it up as SIP trunks, we currently have 
>> call
>> manager on some other servers but may replace (too expensive).   I'm just
>> kind of learning some of these VOIP terms, but I'm thinking we could
>> probably do this.
>>
>> Also, they are T-1's coming into the 7206's, not T3's.  I would like to
>> leave the call manager out of it alltogether.
>>
>>
>>
>> ----- Original Message ----- 
>> From: "Lull, Rick" <Rick_Lull at bshsi.com>
>> To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
>> <asterisk-users at lists.digium.com>
>> Sent: Monday, August 08, 2005 10:08
>> Subject: RE: [Asterisk-Users] Cisco 7206 and Sample configs (Newbie)
>>
>>
>> >
>> > Are you going to run Call Manager Express on that router or are you 
>> > going
>> > to
>> > use it in a different manner?
>> >
>> > I've had so-so luck making CME talk to * and back for all functions, 
>> > but
>> > it
>> > can work.
>> >
>> > Rick
>> >
>> > -----Original Message-----
>> > From: Ronnie Tartar [mailto:rtartar at host2max.com]
>> > Sent: Saturday, August 06, 2005 5:13 PM
>> > To: asterisk-users at lists.digium.com
>> > Subject: [Asterisk-Users] Cisco 7206 and Sample configs (Newbie)
>> >
>> > Newbie to Asterisk
>> >
>> > I've been looking around for a little while, can't seem to find some
>> > sample
>> > configs for using a Cisco 7206 as a gateway.  The below link is an 
>> > initial
>> > plan of an Asterisk solution that may replace our Cisco Call Manager 
>> > 3.1/
>> > IPCC / IVR setup.  We currently have all of the hardware below.  Just 
>> > take
>> > a
>> > peak and see if there is anything that is off base.  I don't know If I
>> > will
>> > be able to use the vg248 but would like to.  We have a call center that 
>> > is
>> > currently dormant but are considering opening it back up (approx 200
>> > seats).
>> > Also looking for ways to cluster or make it highly available.  I looked
>> > around, not a whole lot of info on this.
>> >
>> > Thanks in advance.
>> >
>> >
>> >
>> > http://www.designatedsystems.com/dynlink.jsp?link_id=63
>> >
>> >
>> > _______________________________________________
>> > Asterisk-Users mailing list
>> > Asterisk-Users at lists.digium.com
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> > To UNSUBSCRIBE or update options visit:
>> >   http://lists.digium.com/mailman/listinfo/asterisk-users
>> >
>> > ________________________________________________________________________________________________________________________________
>> > ________________________________________________________________________________________________________________________________
>> >
>> > The information in this communication is intended to be confidential to
>> > the Individual(s) and/or Entity to whom it is addressed.
>> > It may contain information of a Privileged and/or Confidential nature,
>> > which is subject to Federal and/or State privacy regulations.
>> > In the event that you are not the intended recipient or the agent of 
>> > the
>> > intended recipient, do not copy or use the information
>> > contained within this communication, or allow it to be read, copied or
>> > utilized in any manner, by any other person(s).  Should
>> > this communication be received in error, please notify the sender
>> > immediately either by response e-mail or by phone,
>> > and permanently delete the original e-mail, attachment(s), and any 
>> > copies.
>> >
>> > _______________________________________________
>> > Asterisk-Users mailing list
>> > Asterisk-Users at lists.digium.com
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> > To UNSUBSCRIBE or update options visit:
>> >   http://lists.digium.com/mailman/listinfo/asterisk-users
>> >
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>