[Asterisk-Users] Re: TDM400P - All extensions have same CallerID

[gw at adcomcorp.com]

As I recall, should channels start as channel=>2 and not channel=2?

I have all mine config'ed channel => 2 and it works fine...

Greg 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Time
Bandit
Sent: Saturday, August 06, 2005 3:39 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Re: TDM400P - All extensions have same
CallerID

> Ok, so the scope of the configuration is from channel= to channel= 
> statement with the configuration for the channel coming before the 
> channel statement.
> 
> As in...
> 
> 
> these=are
> configs=for
> the=first
> channel=1
> 
> these=are
> configs=for
> the=second
> channel=2
In fact, all the settings that you don't change stay the same as with
the last channel.

Ex.: 
callerid=asreceived
otherparam=1
channel=2

otherparam=2
channel=3

In channel 3, the callerid param is still "asreceived" because nothing
changed it

hth
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users