[Asterisk-Users] MFC/R2 Mexico Unicall Blocked

[Athiel E. Criollo Merino]

Hi Ariel.

I having working a Asterisk server with a digital Telmex Line.  (10 Lines )

this are my files configurations .... i hope this can help you

zaptel.conf
span=1,1,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:1101
loadzone = us
defaultzone=us


unicall.conf
loglevel=255
protocolclass=mfcr2
protocolvariant=mx,20,4
protocolend=cpe
group = 1
context=incoming
channel => 1-15
channel => 17-31

Asterisk UC show channels
Channel Extension  Context         Status     Language   MusicOnHold
      1        incoming        Idle       es         default
      2        incoming        Idle       es         default
      3        incoming        Idle       es         default
      4        incoming        Idle       es         default
      5        incoming        Idle       es         default
      6            incoming        Idle       es         default
      7            incoming        Idle       es         default
      8            incoming        Idle       es         default
      9            incoming        Idle       es         default
     10            incoming        Idle       es         default
     11            incoming        Blocked    es         default
     12            incoming        Blocked    es         default
     13            incoming        Blocked    es         default





2005/8/3, Ariel Molina R. <ariel at zarzamora.com.mx>:
> I've been trying to configure an E1 in Mexico using unicall, i went
> into vozdigital, googled this list, and finally followed this
> instructions:
> http://voip-info.org/tiki-index.php?page=Asterisk+MFC+R2
> 
> I have 10 PSTN numbers and 10 "lines" assigned, so i only have 10
> "channels" assigned from my telco.
> 
> However when i try to simulate a call using this call file:
> --------call file------
> Channel: UniCall/g1/1
> Callerid: <4772140099>
> MaxRetries: 0
> RetryTime: 600
> WaitTime: 600
> Context: principal_in
> Extension: 014433988789
> Priority: 1
> ----------------------
> 
> I get this messages
> --------------------------------------
> Aug  4 11:46:06 WARNING[9420]: chan_unicall.c:1240 unicall_call:
>        Make Call failed - Blocked
> Aug  4 11:46:06 NOTICE[9420]: channel.c:1827 __ast_request_and_dial:
>        Unable to request channel UniCall/g1/1
>     -- Hungup 'UniCall/11-1'
> Aug  4 11:46:06 NOTICE[9420]: pbx_spool.c:229 attempt_thread:
>        Call failed to go through, reason 0
> --------------------------------------
> 
> So i can see Unicall channels are configured but blocked (as UC show
> channel). There is not much info about unicall so i require your
> advice, what can i do? Where do i look?
> 
> Also i constantly receive messages
> Aug  4 11:54:07 WARNING[9402]: chan_unicall.c:2865 handle_uc_event:
> Unicall/14 event Protocol failure
> 
> for each one of the 30  (31?) channels.
> 
> I send you my configs and important command outputs:
> 
> My zaptel.conf
> -------------------
> # MFC/R2 does not normally use CRC4
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> cas=17-31:1101
> loadzone=mx
> defaultzone=us
> -------------------
> 
> My unicall.conf
> -------------------
> [channels]
> context=incoming
> usecallerid=yes
> hidecallerid=no
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> echotraining=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> musiconhold=default
> 
> protocolclass=mfcr2
> protocolvariant=mx,10,10
> protocolend=cpe
> group = 1
> channel => 1-15
> channel => 17-31
> -------------------
> 
> "ztcfg -vv" outputs
> -------------------
> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> 
> Channel map:
> 
> Channel 01: CAS / User (Default) (Slaves: 01)
> Channel 02: CAS / User (Default) (Slaves: 02)
> (...)
> Channel 30: CAS / User (Default) (Slaves: 30)
> Channel 31: CAS / User (Default) (Slaves: 31)
> 
> 30 channels configured.
> -------------------
> 
> 
> "UC show channels" says
> -------------------
> Channel Extension  Context         Status     Language   MusicOnHold
>       1            incoming        Blocked               default
>       2            incoming        Blocked               default
>       3            incoming        Blocked               default
>       4            incoming        Blocked               default
>       5            incoming        Blocked               default
>       6            incoming        Blocked               default
>       7            incoming        Blocked               default
>       8            incoming        Blocked               default
>       9            incoming        Blocked               default
>      10            incoming        Blocked               default
>      11            incoming        Idle                  default
>      12            incoming        Idle                  default
> (...)
>      31            incoming        Idle                  default
> 
> 
> ---
> @-@
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>