[Asterisk-Users] Re: TDM400P - All extensions have same CallerID
Andrew Latham
lathama at gmail.com
Sat Aug 6 10:34:18 MST 2005
No real start, Channel ends and the following is assumed to be the next channel.
On 8/6/05, Zachary Whitley <mail at zacharywhitley.com> wrote:
> On Sat, 2005-08-06 at 11:36 -0500, Larry Shields wrote:
> > Check your "zapata.conf" file. Your terminal profile options section under
> > [channels] should be ended by adding the associated channel, i.e. channel =>
> > 1
> >
> > Sample two port config:
> >
> > [channels]
> > ;
> > ; Default language
> > ;
> > language=en
> >
> > ; Default terminal profile FXS PORT1
> > ;
> > context=internal
> > signalling=fxo_ks
> > usecallerid=yes
> > callerid="Line 1" <2001>
> > callwaiting=yes
> > callwaitingcallerid=yes
> > callreturn=yes
> > echocancel=yes
> > echocancelwhenbridged=yes
> > rxgain=0.0
> > txgain=0.0
> > mailbox=2001
> > group=1
> >
> > channel => 1
> >
> > ; Default terminal profile FXS PORT2
> > ;
> > context=internal
> > signalling=fxo_ks
> > usecallerid=yes
> > callerid="Line 2" <2002>
> > callwaiting=yes
> > callwaitingcallerid=yes
> > callreturn=yes
> > echocancel=yes
> > echocancelwhenbridged=yes
> > rxgain=0.0
> > txgain=0.0
> > mailbox=2002
> > group=1
> >
> > channel => 2
> >
> >
> >
> > "Mike Putnam" <asterisk at mikeputnam.com> wrote in message
> > news:<003701c59a97$de0fe510$058fa8c0 at dragonship>...
> > > I've been searching the forums and on the list to see if this has been
> > > addressed. If it has, could someone point me to the thread to fix or at
> > > least acknowledge it is an issue and what is causing it. Posting to the
> > list
> > > was last resort as I couldn't find a solution anywhere else.
> > >
> > > Setup:
> > > Asterisk at Home 1.3 (this is my first system, so path of least resistance)
> > > Digium TDM400P (2 FXS on ports 1 & 2, 2 FXO on 3& 4)
> > >
> > > My FXS extentions are 201 and 210. Both of my FXS extentions report being
> > > the same extension when doing a *65. It is always the last extension
> > > configured as well, in this case 210. In fact, when recording prompts,
> > even
> > > if I'm on extension 201, I have to tell the system that I'm on extension
> > > 210. I deleted the second extention and 201 started acting properly. I
> > added
> > > a new extension (x400) and both are being reported as 400 now. To make
> > > things even more confusing, calls can be placed to the proper extension,
> > so
> > > it
> > > seems to be something with CallerID, but I can figure out what it is. As
> > > stated,
> > > this was my first system so I used AAH to get up and running fast and then
> > > work backwards to learn and use the system. I started with AAH 1.1 and
> > > everything worked fine for about 2 weeks, then I noticed a problem when I
> > > started having messages on x201 but the light wasn't blinking. To the best
> > > of my memory, when I started out I didn't have this problem. Both
> > extensions
> > > were acting normally. I didn't put on any AAH or Asterisk updates. I'm
> > > running AAH 1.3 now just to see if it would fix the problem.
> > >
> > > Any and all suggestions are greatly appreciated.
> > >
> > > Mike
> > >
>
> After messing around with the zapata.conf file I have a few questions.
> What determines the scope of commands in the zapata.conf file? In
> zapata.conf we're defining channels, correct? Since the config file is
> kind of flat. (everything is under [channel]) What is the official start
> and end of a channel block? Does it start with context= and end with
> channel= ?
>
> Why isn't there separate blocks?
>
> ie.
>
> [channel1]
> ...
> ...
> ...
>
> [channel2]
> ...
> ...
> ...
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
---
Andrew Latham - AKA: LATHAMA (lay-th-ham-eh)
lathama at lathama.com - lathama at yahoo.com - lathama at gmail.com
If any of the above are down we have bigger problems than my email!
---
More information about the asterisk-users
mailing list