[Asterisk-Users] Asterisk MWI and Realtime

[Michael Baird]

Ok, thanks, I tried it on my device again (Zoom X5v), and it is not
working via the flat file either. I'll inform Zoom engineering and see
what they say, it could have been broken in a firmware update. 

So I can explain it properly, am I correct in thinking that asterisk
only sends the "Sip Notify" command to the ATA, then the ATA actually
provides the stutter tone/short rings, to notify the user they have
voicemail waiting. I have notified zoom in the past about their device
not recognizing the Sip Notify, asterisk notes it as being unsupported.
I have several other ATA's, I will try them to verify asterisk is
working properly, but with your input, I think the ATA is the issue now.

Regards
Michael Baird

> > turned on there. I do get the Sip Notify when a message is left, just no
> > stutter tone when picking up the phone. I will also refresh my build as
> > well, hopefully no big changes.
> 
> 	The stutter tone will be a phone/ATA specific issue not related to 
> Asterisk.
> 
> 	For instance, I know the Linksys PAP2-NA's give you the option of 
> stutter tone, or quick ring, etc..when there are voicemails.
> 
> -Matthew
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users