[Asterisk-Users] Snom 360 and firmware 4.0 problem

[Bob Goddard]

On Friday 05 Aug 2005 19:16, Michael George wrote:
> I have a pair of snom 360s at a customer and they were giving me Low Memory
> errors.  The distributor suggested updating the firmware.  I did that, to
> the one just below 4.0 (which wasn't released yet).  One of the phones is
> still giving the Low Memory error every 3-4 days.  The other one had a
> broken display that was just RMA'd, so it' hasn't been up long enough to
> know if the error occurs on that one, too.
>
> The distributor's latest suggestion was to go to the newest firmware, 4.0. 
> I did that on the new 360 (from the RMA) and with the same account settings
> as the one it was replacing, it could not register with *.
>
> Since I was in a pinch, I "updated" the firmware down to the latest below
> 4.0 and the phone works just fine.
>
> Does anyone with more knowledge than I know what might be going on?  Maybe
> a new default setting in 4.0 that's breaking things?

We've used 190s, 200s & 220s and pretty much all of them have suffered from
this problem. It's just poor programming on Snoms part, hence one of the
reason why I want us to move away from them. One of the things you can do
is reduce the logging level to 0. It does not cure it, but does increase
the time until it craps out.


B