[Asterisk-Users] Snom 360 and firmware 4.0 problem

[Remco Barende]

Did you install the license file as per the instructions? Starting version 
4.0 Snom thought it would be nice to be a real pain in the ass to people 
with a lot of Snom phones. You need to go to a webpage and enter the mac 
address of the phone and they will send you a license file.

Only after you install the license file the phone will make a SIP 
connection.

How nice if you have approx 40 phones that need upgrading :(

Snom never replied to my complaint about the license thing, i have 40 
users that are unable to do that themselves unless I take 3 hours per user 
to explain it and I can do it quicker myself......

I have the same problems too btw, low memory errors and broken displays on 
some phones (one or two lines are completely dead). I still have to RMA 
the phones.



On Fri, 5 Aug 2005, Michael George wrote:

> I have a pair of snom 360s at a customer and they were giving me Low Memory
> errors.  The distributor suggested updating the firmware.  I did that, to the
> one just below 4.0 (which wasn't released yet).  One of the phones is still
> giving the Low Memory error every 3-4 days.  The other one had a broken
> display that was just RMA'd, so it' hasn't been up long enough to know if the
> error occurs on that one, too.
>
> The distributor's latest suggestion was to go to the newest firmware, 4.0.  I
> did that on the new 360 (from the RMA) and with the same account settings as
> the one it was replacing, it could not register with *.
>
> Since I was in a pinch, I "updated" the firmware down to the latest below 4.0
> and the phone works just fine.
>
> Does anyone with more knowledge than I know what might be going on?  Maybe a
> new default setting in 4.0 that's breaking things?
>
> Thank you.
>
>