[Asterisk-Users] Cisco ATA and a PayPhone

[Rich Adamson]

> >> I've done this using SPA-2000, SPA-2000 can generate polarity 
> >> reversal signal, The pay-phone detects "call answer" and "hangup" by 
> >> revesal signal.
> >> also the pay-phone must be supported polarity reversal detection.
> >>
> > Anyone got any suggestions?  I need to know what piece of hardware I 
> > need (ATA preferably) that allows me to pick up an analog phone, sit 
> > idle and not get the reorder tones for at least 1 minute.  I am 
> > currently using a Cisco ATA-188 and I get them at 10 seconds.  I've 
> > monkeyed with every single bit of the config file and can't seem to 
> > extend or disable it.  HELP!!
> >
> Help is on the way:)
> 
> This is quite simple to achieve on Sipura units.  There is a parameter 
> called
> 
> Dial Tone:   350 at -19,440 at -19;10(*/0/1+2)
> 
> It defines the frequencies and duration of the tone.  The "10" you see 
> near the end is the duration.  Simply change it to 60 like this and 
> you're done:
> 
> Dial Tone:   350 at -19,440 at -19;60(*/0/1+2)
> 
> I just tried it and it works like you want it.

I'm not the OP and do plan on deploying several spa3k's, is there
somewhere this kind of stuff is documented for the spa's?