[Asterisk-Users] Polycom phones w/ two lines on different servers

[Chris Coulthurst]

I can't offer you a config file since I no longer have a dual-server 
solution (I was just testing its feasibility) but I can tell you what I did.

I didn't configure the second server on the sip.cnf files, I did it from the 
Browser page.  The first server was an internal lan, which is also where the 
DNS comes from.  The second server, I used the FQDN of the outside-world 
server.  Other than usernames and passwords, I left all of the other fields 
as default.  I have the IP 500 with 1.5.2.0054 SIP software and the OLDER 
2.6.1 bootrom (for retro-compatibility).

Oh, I also set 2 line appearances per "CO" key, rather than the default (I 
think it was 8?)

Worked like a champ!

Chris Coulthurst
chris at shuksan.com

----- Original Message ----- 
From: <asterisk at not-real.org>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, August 02, 2005 9:05 AM
Subject: [Asterisk-Users] Polycom phones w/ two lines on different servers


> Hi all -
>
> This isn't really directly Asterisk related, but has anyone successfully
> set up a Polycom phone to register two lines on two different Asterisk
> boxes? I can get the first line to register, but the second one does not.
> I can still place calls from that second line, which indicates to me the
> server, user, and secret are correct. I'm running the newest 2.6 series
> firmware with the newest SIP image.
>
> My <mac>-sip.cfg contains:
> <phone1>
>   <reg reg.1.displayName="1006" reg.1.address="1006 at 192.168.0.90"
> reg.1.label="1006"
>   reg.1.type="private" reg.1.auth.userId="1006" reg.1.auth.password=""
>   reg.1.server.dnsLookupOption="0" reg.1.server.1.address="192.168.0.90"
>   reg.1.server.1.port="5060" reg.1.server.1.expires=""
>   reg.1.server.1.retryTimeOut="" reg.1.server.1.retryMaxCount=""
>   reg.1.server.1.expires.lineSeize="" reg.2.displayName="1003"
> reg.2.address="1003 at 192.168.2.2"
>   reg.2.label="1003" reg.2.type="private" reg.2.auth.userId="1003"
> reg.2.auth.password=""
>   reg.2.server.dnsLookupOption="0" reg.2.server.1.address="192.168.2.2"
> reg.2.server.1.port=""
>
>
> The local overrides file for the phone contain:
> voIpProt.server.2.expires.lineSeize=""
> voIpProt.server.2.retryMaxCount=""
> voIpProt.server.2.retryTimeOut=""
> voIpProt.server.2.register=""
> voIpProt.server.2.expires="3600"
> voIpProt.server.2.transport="DNSnaptr"
> voIpProt.server.2.port="5060"
> voIpProt.server.2.address="192.168.2.2"
>
> Any ideas? Sample configs would be appreciated if you've got something
> like this working in the past.
>
> Thanks,
> Nick
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>