[Asterisk-Users] Few questions about Asterisk

Tue Aug 2 17:28:24 MST 2005

Hello,

I have few questions about Asterisk.
I installed Asterisk from CVS on FreeBSD and I made cvsup 2 days ago.

1.I couldn't find Asterisk version using "asterisk -V" command.

How can I to find version information?

2.I am using Wildcard X101P (FXO) and Wildcard TDM400P REV E/F (FXS)on
it.

I tried Asterisk CallerID feature, but unable to get it.
I tried callerid signaling V23, Bell202, DTMF, no success. Finally, I
found in our country (Mongolia) PSTN/Cellular provider send FSK/ETSI
type of CallerID.

Is Asterisk support such type of CallerID signaling?

If no, is there any way to get it?

3.I enjoyed Asterisk most of feature until now. I registered X-Pro
softphone, SIP analog and analog phone connected to FXS port too.

There one problem is I am unable to make outgoing call from SIP phone,
softphone, analog phone through FXO port.

Following is my Asterisk configuration:
------------------------------------------
zaptel.conf
loadzone=us
defaultzone=us
fxsks=1
fxoks=2

zapata.conf
context=bell
signaling=fxs_ks
group=1
channel => 1

context=home
group=2
signalling=fxo_ks
channel => 2

sip.conf
[88888888]
type=friend
username=88888888
;secret=1111
host=dynamic
nat=yes
defaultip=192.168.1.5
context=bell
reinvite=no
canreinvite=no
callerid=88888888
mailbox=88888888 at local
allow=g729
allow=g723
allow=all

[99999999]
type=friend
username=99999999
;secret=1111
host=dynamic
nat=yes
defaultip=192.168.1.1
context=bell
reinvite=no
canreinvite=no
callerid=99999999
mailbox=99999999 at local
allow=g729
allow=g723

extensions.conf
[bell]
exten => s,1,Wait
exten => s,2,Answer
exten => s,3,Playback(greetings)
exten => s,4,WaitExten

; used to record prompts
exten => 205,1,Wait(2)
exten => 205,2,Record(/tmp/greetings:alaw)
exten => 205,3,Wait(2)
exten => 205,4,Playback(/tmp/greetings)
exten => 205,5,Wait(2)
exten => 205,6,Hangup

exten => 111,1,Dial(CONSOLE/dsp)
exten => 111,2,Hangup

exten => 100,1,Answer
exten => 100,2,MusicOnHold()
exten => 100,4,Hangup

exten => 200,1,VoicemailMain

exten => 300,1,Dial(Zap/2)

exten => 400,1,Voicemail(99999)

exten => 800,1,MeetMe(100|Mp)
exten => 800,2,Hangup

exten => 601,1,WaitMusicOnHold(30)

exten => 700,1,Dial(SIP/88888888,20,rt)
exten => 900,1,Dial(SIP/99999999,20,rt)

exten => _ZXXX,1,Answer
exten => _ZXXX,2,Dial(Zap/g1/${EXTEN})
exten => _ZXXXX,1,Answer
exten => _ZXXXX,2,Dial(Zap/g1/${EXTEN})
exten => _NXXXXX,1,Answer
exten => _NXXXXX,2,Dial(Zap/g1/${EXTEN})
exten => _NXXXXXXX,1,Answer
exten => _NXXXXXXX,2,Dial(Zap/g1/${EXTEN})

[home]
exten => s,1,Playback(greetings)
exten => 100,1,Answer
exten => 100,2,MusicOnHold()
exten => 100,4,Hangup

exten => 111,1,Dial(CONSOLE/dsp)
exten => 111,4,Hangup

exten => 700,1,Dial(SIP/88888888,20,rt)
exten => 900,1,Dial(SIP/99999999,20,rt)

exten => _ZXXX,1,Answer
exten => _ZXXX,2,Dial(Zap/g1/${EXTEN})
exten => _ZXXXX,1,Answer
exten => _ZXXXX,2,Dial(Zap/g1/${EXTEN})
exten => _NXXXXX,1,Answer
;exten => _NXXXXX,2,SetVar(TIMEOUT(AbsoluteTimeout)=10)
exten => _NXXXXX,3,Dial(Zap/g1/${EXTEN})
exten => _NXXXXXXX,1,Answer
exten => _NXXXXXXX,2,Dial(Zap/g1/${EXTEN})

I can to see following in /var/log/messages when I make outgoing call.

Jul 20 00:50:26 boldsoft kernel: Zapata Telephony Interface Registered
on major 196
Jul 20 00:50:26 boldsoft kernel: ZapTel device: vendor=e159 device=1
subvendor=8085
Jul 20 00:50:26 boldsoft kernel: wcfxo0: <Wildcard X101P> port
0xe800-0xe8ff mem 0xfaffe000-0xfaffefff irq 18 at device 9.0 on
pci2
Jul 20 00:50:26 boldsoft kernel: ZapTel Attach for wcfxo0: deviceID :
0xe159
Jul 20 00:50:26 boldsoft kernel: wcfxo: DAA mode is 'FCC'
Jul 20 00:50:26 boldsoft kernel: Found a Wildcard FXO: Wildcard X101P
Jul 20 00:50:26 boldsoft kernel: ZapTel device loaded.
Jul 20 00:50:33 boldsoft kernel: FXS device: vendor=e159 device=1
subvendor=b100
Jul 20 00:50:33 boldsoft kernel: wcfxs0: <Wildcard TDM400P REV E/F>
port 0xec00-0xecff mem 0xfafff000-0xfaffffff irq 17 at dev
ice 8.0 on pci2
Jul 20 00:50:33 boldsoft kernel: FXS Attach for wcfxs0: deviceID :
0xe159
Jul 20 00:50:33 boldsoft kernel: Freshmaker version: 63
Jul 20 00:50:33 boldsoft kernel: Freshmaker passed register test
Jul 20 00:50:35 boldsoft kernel: Module 0: Installed -- AUTO FXS
Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
Jul 20 00:50:35 boldsoft kernel: Module 1: Not installed
Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
Jul 20 00:50:35 boldsoft kernel: Module 2: Not installed
Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
Jul 20 00:50:35 boldsoft kernel: Module 3: Not installed
Jul 20 00:50:35 boldsoft kernel: Found a Wildcard TDM: Wildcard
TDM400P
REV E/F (4 modules)
Jul 20 00:50:39 boldsoft kernel: Registered tone zone 0 (United States
/ North America)
Jul 21 02:36:28 boldsoft kernel: DIAL: T345598w
Jul 21 02:39:43 boldsoft kernel: DIAL: T345598w
Jul 21 02:45:35 boldsoft kernel: DIAL: T345598w
Jul 21 02:45:56 boldsoft kernel: DIAL: T99114909w
Jul 21 02:47:09 boldsoft kernel: DIAL: T345598w
Jul 21 02:47:56 boldsoft kernel: DIAL: T345595w
Jul 21 02:48:16 boldsoft kernel: DIAL: T95158330w
Jul 21 02:48:57 boldsoft kernel: DIAL: T95158330w
Jul 21 02:49:20 boldsoft kernel: DIAL: T345598w
Jul 21 02:49:43 boldsoft kernel: DIAL: T322473w
Jul 21 02:50:02 boldsoft kernel: DIAL: T99114909w
Jul 21 02:50:27 boldsoft kernel: DIAL: T99190040w
Jul 21 02:50:48 boldsoft kernel: DIAL: T95158330w
Jul 21 02:51:11 boldsoft kernel: DIAL: T91911187w
Jul 21 02:54:01 boldsoft kernel: DIAL: T95158330w
Jul 21 02:54:33 boldsoft kernel: DIAL: T345598w
Jul 21 03:04:35 boldsoft kernel: DIAL: T345598w
Jul 21 03:06:00 boldsoft kernel: DIAL: T99190040w
Jul 21 03:06:24 boldsoft kernel: DIAL: T11345598w
Jul 21 03:12:11 boldsoft kernel: DIAL: T1109w
Jul 21 03:13:59 boldsoft kernel: DIAL: T18340w
Jul 21 03:14:18 boldsoft kernel: DIAL: T18000w
Jul 21 03:14:31 boldsoft kernel: DIAL: T18300w
Jul 21 03:14:46 boldsoft kernel: DIAL: T345598w
Jul 21 03:15:16 boldsoft kernel: DIAL: T99190040w
Jul 21 03:15:46 boldsoft kernel: DIAL: T686000w
Jul 21 03:16:09 boldsoft kernel: DIAL: T341341w
Jul 21 03:16:39 boldsoft kernel: DIAL: T99114909w
Jul 21 03:17:02 boldsoft kernel: DIAL: T345598w
Jul 21 09:47:15 boldsoft kernel: DIAL: T345598w

In Mongolia PSTN local number has 5-6 digits, Mobile number has 8
digits and special enquiry service with 3-4 digits.

I can to hear BUSY TONE after several seconds.

4.There another problem with Wildcard TDM400P REV E/F FXS port.

After ~30mins I can't to hear DIALTONE on analog phone connected to
FXS port.

and I got following in /var/log/messages
Jul 21 01:35:39 boldsoft kernel: Power alarm on module 1, resetting!
Jul 21 09:57:06 boldsoft kernel: Freed a Wildcard
Jul 21 09:57:06 boldsoft kernel: ZapTel detach!
Jul 21 09:57:06 boldsoft kernel: wcfxo0: detached
Jul 21 09:57:13 boldsoft kernel: FXS device: vendor=e159 device=1
subvendor=8085
Jul 21 09:57:13 boldsoft kernel: wcfxs1: <Wildcard TDM400P REV H> port
0xe800-0xe8ff mem 0xfaffe000-0xfaffefff irq 18 at devic
e 9.0 on pci2
Jul 21 09:57:13 boldsoft kernel: FXS Attach for wcfxs1: deviceID :
0xe159
Jul 21 09:57:13 boldsoft kernel: Freshmaker version: 85
Jul 21 09:57:13 boldsoft kernel: 00 != 85
Jul 21 09:57:13 boldsoft kernel: 01 != 85
Jul 21 09:57:13 boldsoft kernel: 02 != 85
Jul 21 09:57:13 boldsoft kernel: 03 != 85
Jul 21 09:57:13 boldsoft kernel: 04 != 85
Jul 21 09:57:13 boldsoft kernel: 05 != 85
Jul 21 09:57:13 boldsoft kernel: 06 != 85
Jul 21 09:57:13 boldsoft kernel: 07 != 85
Jul 21 09:57:13 boldsoft kernel: 08 != 85
Jul 21 09:57:13 boldsoft kernel: 09 != 85

  ReplyForward

postmaster at telappliant.com 	
This is an automatically generated Delivery Status Notification. Delivery to ...
	 	  Aug 2 (21 hours ago)

Mail Delivery System 	
<MAILER-DAEMON at lists.digium.com> to me
	 More options	  Aug 2 (21 hours ago)
This is the Postfix program at host lists.digium.com.

I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.

For further assistance, please send mail to <postmaster>

If you do so, please include this problem report. You can
delete your own text from the attached returned message.

                       The Postfix program

<asterisk-dev at lists.digium.com>: mail forwarding loop for
   asterisk-dev at lists.digium.com

Final-Recipient: rfc822; asterisk-dev at lists.digium.com
Action: failed
Status: 5.0.0
Diagnostic-Code: X-Postfix; mail forwarding loop for
   asterisk-dev at lists.digium.com

---------- Forwarded message ----------
From: Ganbold Tsagaankhuu <ganbold at gmail.com>
To: asterisk-users at lists.digium.com, asterisk-dev at lists.digium.com,
asterisk-bsd at lists.digium.com
Date: Tue, 2 Aug 2005 10:38:50 +0900
Subject: [Asterisk-Dev] Questions on Asterisk and CallerID
Hello,