[Asterisk-Users] Channel bank of E1s? (one E1 input --> 2 x E1 output)

[Julio Arruda]

Matteo Brancaleoni wrote:
> yes, some multiplexer allows that, but they're quite expensive
> compared to another E1 card for asterisk.
> I think you'll need at least 1k $$$ for a such splitter.
> 


Matteo, would you have any reference for this 'mux/splitter' ?
I would guess it need to be smart enough to dig into the signalling, 
since is not only the PCM DS0s that would need to be "Y-splitted".
[], <O-O>

> 
> Il giorno ven, 29-04-2005 alle 17:33 +0200, ht at phonitel.com ha scritto:
> 
>>Hi,
>>
>>Assume I have one E1 digium card to which I want to plug two distinct E1 PABXs ,
>>one with 15 channels and the other with 15 channels;
>>
>>Is there a sort of E1 multiplexer devise that allows me to plug in one hand the
>>E1 port of the Digium card and on the other hand the two PABXs? In this same
>>devise, I should be able to say that 15 channels need to go to first Interface
>>and 15 other channels need to go to other interface.
>>
>>Or is it necessary to acquire a another E1 card although I don't need to process
>>more channels (30 channels are ok).
>>
>>Any help is greatly appreciated.