[Asterisk-Users] Problems with TDM400P card

[Anton Krall]

Guys

I have a problem getting a TDM400P card to go.

It has 4 FXS ports (green modules) and I get this error:

[root at conmutador root]# ztcfg -vvvvv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Slaves: 04)
Channel 05: FXO Kewlstart (Default) (Slaves: 05)
Channel 06: FXO Kewlstart (Default) (Slaves: 06)

6 channels configured.

ZT_CHANCONFIG failed on channel 3: Invalid argument (22)
Did you forget that FXS interfaces are configured with FXO signalling
and that FXO interfaces use FXS signalling?

My zaptel.conf reads:

[root at conmutador root]# more /etc/zaptel.conf
fxsks=1
fxsks=2
fxoks=3-6
loadzone=us
defaultzone=us

And my rc.local loads:

/sbin/modprobe zaptel
/sbin/modprobe wcfxo
/sbin/modprobe wctdm

The 2 100p cards load perfectly but the TDM is not. 

Any ideas?