[Asterisk-Users] Polycom IP500 - Phone TIme

[Marty Mastera]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Wiley Siler
> Sent: Thursday, April 28, 2005 12:55 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] Polycom IP500 - Phone TIme
> 
> Hmmmm.... my phones are static IP.  Sooo...
> 
> Thanks,
> Wiley 
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Eric Wieling aka ManxPower
> Sent: Thursday, April 28, 2005 11:36 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Polycom IP500 - Phone TIme
> 
> Wiley Siler wrote:
> > Does anyoe know where I can set the timezone in the configuration
> files?
> > 
> > I am in Phoenix, AZ which has a GMT offset of -7 hours but when I 
> > enter this into the gmt fields in ipmid.cfg nothing seems to happen.
> > 
> > Here are the fields...
> >  tcpIpApp.sntp.address="" tcpIpApp.sntp.gmtOffset=""
> 
> I never set the timezone in the Polycom config file.  I set 
> it in the DHCPd config file.
> 
> /etc/dhcpd.conf:
>     option ntp-servers 172.17.2.1;
>     option time-offset -21600;
> 


If I remember correctly, when setting the offset in the cfg files it
needs to be specified in seconds, not hours - for instance in ipmid.cfg:

<SNTP tcpIpApp.sntp.resyncPeriod="86400"
tcpIpApp.sntp.address="131.107.1.10"
tcpIpApp.sntp.gmtOffset="-25200".....


Marty