[Asterisk-Users] Incoming calls and CAPI
igil at europesip.com
igil at europesip.com
Thu Apr 28 01:38:19 MST 2005
Hello all,
I just instaled an AVM C4 card on my asterisk to connect it to the PSTN
and send or revibe calls using it.
I can make calls perfectly, two calls over the same port at same time.
The problem appears when a call arribes. CAPI seems to answer it and pass
it to asterisk and the call hangs up.
Any clue will be welcomed.
thaks for your time.
I get this logs errors.
-- CONNECT_IND ID=001 #0x0bce LEN=0035
Controller/PLCI/NCCI = 0x102
CIPValue = 0x1
CalledPartyNumber = <89>402
CallingPartyNumber = <09 80>201
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <80 90 a3>
LLC = default
HLC = default
AdditionalInfo = default
Apr 28 05:05:45 NOTICE[727]: chan_capi.c:1932 capi_handle_msg:
CONNECT_IND ID=001 #0x0bce LEN=0035
Controller/PLCI/NCCI = 0x102
CIPValue = 0x1
CalledPartyNumber = <89>402
CallingPartyNumber = <09 80>201
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <80 90 a3>
LLC = default
HLC = default
AdditionalInfo = default
== CONNECT_IND (PLCI=0x102,DID=402,CID=201,CIP=0x1,CONTROLLER=0x2)
== Starting CAPI[contr2/402]/18 at llamadas_entrantes,402,1 failed
so falling back to exten 's'
-- Executing GotoIf("CAPI[contr2/402]/18",
"0?horario_oficina_okm|s|1") in new stack
-- Executing GotoIf("CAPI[contr2/402]/18",
"0?horario_oficina_alaire|s|1") in new stack
-- Executing GotoIf("CAPI[contr2/402]/18",
"0?llamada_aitor_gil|s|1") in new stack
-- Executing GotoIf("CAPI[contr2/402]/18",
"0?contexto_fax_recepcion1|s|1") in new stack
-- Executing Goto("CAPI[contr2/402]/18",
"contexto_operadora_okm|s|1") in new stack
-- Goto (contexto_operadora_okm,s,1)
-- Executing Answer("CAPI[contr2/402]/18", "") in new stack
-- Executing SetLanguage("CAPI[contr2/402]/18", "es") in new stack
-- Executing Dial("CAPI[contr2/402]/18", "SIP/100|70|Ttr") in new
stack
-- Called 100
-- started pbx on channel (callgroup=2)!
-- INFO_IND ID=001 #0x0bcf LEN=0019
Controller/PLCI/NCCI = 0x102
InfoNumber = 0x70
InfoElement = <89>402
-- INFO_IND ID=001 #0x0bd0 LEN=0016
Controller/PLCI/NCCI = 0x102
InfoNumber = 0x18
InfoElement = <89>
-- ALERT_CONF ID=001 #0x0bce LEN=0014
Controller/PLCI/NCCI = 0x102
Info = 0x0
-- INFO_IND ID=001 #0x0bd1 LEN=0017
Controller/PLCI/NCCI = 0x102
InfoNumber = 0x8
InfoElement = <82 90>
-- DISCONNECT_IND ID=001 #0x0bd2 LEN=0014
Controller/PLCI/NCCI = 0x102
Reason = 0x3490
== DISCONNECT_IND PLCI=0x102 REASON=0x3490
== Spawn extension (contexto_operadora_okm, s, 3) exited non-zero on
'CAPI[contr2/402]/18'
-- CONNECT_IND ID=001 #0x0bd3 LEN=0035
Controller/PLCI/NCCI = 0x102
CIPValue = 0x1
CalledPartyNumber = <89>409
CallingPartyNumber = <09 80>201
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <80 90 a3>
LLC = default
HLC = default
AdditionalInfo = default
Apr 28 05:05:47 NOTICE[727]: chan_capi.c:1932 capi_handle_msg:
CONNECT_IND ID=001 #0x0bd3 LEN=0035
Controller/PLCI/NCCI = 0x102
CIPValue = 0x1
CalledPartyNumber = <89>409
CallingPartyNumber = <09 80>201
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <80 90 a3>
LLC = default
HLC = default
AdditionalInfo = default
== CONNECT_IND (PLCI=0x102,DID=409,CID=201,CIP=0x1,CONTROLLER=0x2)
== Starting CAPI[contr2/409]/19 at llamadas_entrantes,409,1 failed
so falling back to exten 's'
-- Executing GotoIf("CAPI[contr2/409]/19",
"0?horario_oficina_okm|s|1") in new stack
-- Executing GotoIf("CAPI[contr2/409]/19",
"0?horario_oficina_alaire|s|1") in new stack
-- Executing GotoIf("CAPI[contr2/409]/19",
"0?llamada_aitor_gil|s|1") in new stack
-- Executing GotoIf("CAPI[contr2/409]/19",
"0?contexto_fax_recepcion1|s|1") in new stack
-- Executing Goto("CAPI[contr2/409]/19",
"contexto_operadora_okm|s|1") in new stack
-- Goto (contexto_operadora_okm,s,1)
-- Executing Answer("CAPI[contr2/409]/19", "") in new stack
-- Executing SetLanguage("CAPI[contr2/409]/19", "es") in new stack
-- Executing Dial("CAPI[contr2/409]/19", "SIP/100|70|Ttr") in new
stack
-- Called 100
-- started pbx on channel (callgroup=2)!
-- INFO_IND ID=001 #0x0bd4 LEN=0019
Controller/PLCI/NCCI = 0x102
InfoNumber = 0x70
InfoElement = <89>409
-- INFO_IND ID=001 #0x0bd5 LEN=0016
Controller/PLCI/NCCI = 0x102
InfoNumber = 0x18
InfoElement = <89>
-- ALERT_CONF ID=001 #0x0bd3 LEN=0014
Controller/PLCI/NCCI = 0x102
Info = 0x0
-- INFO_IND ID=001 #0x0bd6 LEN=0017
Controller/PLCI/NCCI = 0x102
InfoNumber = 0x8
InfoElement = <82 90>
-- DISCONNECT_IND ID=001 #0x0bd7 LEN=0014
Controller/PLCI/NCCI = 0x102
Reason = 0x3490
== DISCONNECT_IND PLCI=0x102 REASON=0x3490
== Spawn extension (contexto_operadora_okm, s, 3) exited non-zero on
'CAPI[contr2/409]/19'
Asterisk-OKM*CLI>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050428/f6cf3d92/attachment.htm
More information about the asterisk-users
mailing list