[Asterisk-Users] RJ45 to RJ11?

[David Phelan]

I think you will find it is pin reversed.....
So flip the RJ45 Over

Dave	 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Gregory Junker
Sent: Thursday, 28 April 2005 4:29 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] RJ45 to RJ11?

Connect the POTS pair to pins 4 and 5 in the RJ45, and you should be fine (I
say this not having looked at the TDM400 specs, but from the perspective of
standard wiring practice and the assumption that Mark et al followed same).

Greg

Paul Shiflet wrote:

>I just received my TDM400 card from digium with 2 fxo and 2 fxs 
>interfaces. They are all RJ45 ports as opposed to RJ11 like my POTS 
>phones. How do i interface my POTS phones with this; can i just crimp 
>an
>RJ45 connection on the end of the phone cord?
>
>Paul
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>  
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.10.3 - Release Date: 25/04/2005