[Asterisk-Users] Receiving Incoming Calls not working properly on TDM400P with 4 FXO modules

[Robert Webb]

On Wed, 27 Apr 2005 11:24:24 -0600
  Andrew Elchuk <aelchuk at cronustech.com> wrote:
> Hi,
> 
> I have two of the above installed into a server running 
>Asterisk on Debian Linux.  Currently, only two phone 
>lines are connected to the system.  I had both phone 
>lines plugged into the one card, and it worked fine for 
>dialing out on them, but when receiving incoming calls, 
>only the line plugged into port 1 would answer.  I then 
>tried plugging the other line into ports 3 and 4 on the 
>first wildcard and they were no go, and then tried port 1 
>on the other card and it worked fine for dialing out and 
>answering??  I checked and the cards are not sharing an 
>IRQ with anything else, and in wcfxs.c, #define 
>AUDIO_RINGCHECK 1 is already commented out, as other 
>forums mentioned it could be a problem.  What gives here?
> 
> zaptel.conf
> fxsks=1
> fxsks=2
> fxsks=3
> fxsks=4
> fxsks=5
> fxsks=6
> fxsks=7
> fxsks=8
> loadzone=us
> defaultzone=us
> 
> zapata.conf
> [trunkgroups]
> 
> [channels]
> language=en
> context=main-menu
> signalling=fxs_ks
> echocancel=yes
> echocancelwhenbridged=yes
> echotraining=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> musiconhold=default
> callerid=asreceived
> signalling=fxs_ks
> channel => 1-8
> 
> Thanks.
> 


How about posting the appropriate lines from dmesg to make 
sure that all the channels were recognized by the zaptel 
driver. Then we can go from there.

Robert