[Asterisk-Users] Good FXO for UK use.

[Johan Akerstrom]

I had a look at it and...yes it seems to be the same card and it costs
much less then I payed for it :(
 
- j -
 


________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Razza
Sent: 26 April 2005 17:16
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Good FXO for UK use.


Got a feeling that the same card I bought from goods2world.co.uk, which
gave me terrible echo problems, due to the impedance mismatch of the US
telco network (600ohm) versus the BT network.
 
When using that card all seemed to disconnect fine, I assume the issue
lies with the TDM400/FXO daughter board.
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Johan
Akerstrom
Sent: 26 April 2005 15:39
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Good FXO for UK use.


I just bought a DigitNetworks card called "DigitNetworks X100P - FXO PCI
card" which supposedly is compatible with the discontinued Digium X100P
card. This is a single port FXO card. Tell me how to test for the TDM400
problem and I'll perform a test and post my results back to the list.
The card is dead cheap $25 (but $36 :-( for shipping ).
 
Regards Johan.

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Razza
Sent: 26 April 2005 14:25
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Good FXO for UK use.


This maybe an out of place comment but it would appear Digium show
little to no interest in non-North American implementations, do we know
if they are ever going to resolve this issue? or indeed how much it
would cost? Based on my experience I'm sure there are a number of UK
based people who could jointly fund such a development for a reasonable
FXO product?
 
Patrick Lidstone wrote:
No the TDM400 does not work, it does not detect calling party
termination correctly, so IVR and voicemail do not see the caller hang
up on BT lines. Digium are aware of the problem, but fixing it doesn't
seem to be a high priority, despite the fact that they have been
supplied with detailed technical information regarding BT line behaviour
:-(. 
 
Ian D. Willoughby wrote : 
Patrick is right about this , I get 20 or so seconds of solid tone at
the end of all my voicemails,
but I can live with this for the sake of no echo.

 

********************************************************************** 

Please note: The e-mail accompanying this disclaimer is confidential and
may also be privileged. 

Please notify us immediately if you are not the intended recipient. You
should not copy it, forward it, or use it for any purpose or disclose
the contents to any person. 

This email has been swept for viruses using tools from our preferred
suppliers. Telamon Systems actively supply both mail-scanning and
anti-virus products in addition to supplying a range of security,
infrastructure and business solutions to our customers. 

For further details please see our web site at www.telamon.co.uk, email
information at telamon.co.uk or call our sales team on +44 (0)870 607 4747 

********************************************************************** 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050427/0f0e1e46/attachment.htm