[Asterisk-Users] Static and echo on PRI

[Mark Johnson]

Andrew Kohlsmith wrote:

>On April 26, 2005 06:19 pm, Mark Johnson wrote:
>  
>
>>Does anyone have some suggestions on how to get rid of this static on my
>>Digium card?  I am supposed to go live tomorrow night and will get shot
>>if it's like this!!
>>    
>>
>
>Lack of planning on your part does not constitute an emergency on our part.
>
>There were a number of suggestions given to you over the past week or so and a 
>great number of them (including some given by myself) have gone unanswered.  
>Perhaps you should read over this thread and make sure you haven't missed 
>anything.
>
>-A.
>  
>
Um...  If you read my orginal post, this was unplanned as I had a Cisco 
hardware failure.  I have been working on building Asterisk for over 6 
months and don't have the luxury of forking out over $5,000 for a test 
T1.  I also have noticed that in looking through this particular thread 
that I have never seen your name in it.  Just double checked the 
archives and, nope, you aren't there...

I have tried every suggestion and replied my results.

If you don't have any facts to share, please don't bother.  I am 
desperate and don't have alot of time left and am begging for the list's 
advice.  I left probably the largest post this month with EXACTLY what I 
have tried, the results, debug information, etc...  I have removed 
drivers, swapped cards, changed IRQ's...  I am open to any suggestions.  
If you tell me to go buy a different card, I will do that.  You guys 
know more about than I do.  What do you suggest, exactly?

Mark