[Asterisk-Users] pridialplan/TON question

[Klaus Darilion]

Marc Storck wrote:
>>> Anyway, if I set TON to unknown, I have to send the number according 
>>> to the PSTN dialing plan (00 for int, 0 for national, ...). Thus, if 
>>> the PBX does not use UNKNOWN, I have to translate the numbers out of 
>>> their original TON to ton=unknown. Therefore, I need to process the 
>>> incoming TON. How do I handle this?
>>
>>
>>
>> You have two options:
>>
>> 1) Use the CALLINGTON variable in the dialplan. This is only for the 
>>    calling party number, not the called party number.
>>
>> 2) Use the internationalprefix, nationalprefix, localprefix etc 
>> settings    in the zapata.conf file. I _think_ this will affect both 
>> the    interpretation of calling and called party and possibly also 
>> the    TON of the called number for outgoing links. I am nut sure 
>> under    which circumstances these variables are applied.
>>
>> Isdn handling in Asterisk tends to be these kinds of hacks. 
> 
> 
> I have a Digium E100P card, with an EuroISDN PRI E1. On incoming calls 
> the CALLINGTON variable is empty. I have the latest stable version of 
> asterisk. Do I have to use another variable or is the TON only support 
> in CVS?

CALLINGTON is only in CVS. internationalprefix, ... is only in CVS or 
using stable patched with bristuff.

regards,
klaus