[Asterisk-Users] What small PC can take 8 FXS + 8 FXO cards

[Karl H. Putz]

>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Andrew
>Kohlsmith
>Sent: Monday, April 25, 2005 8:04 AM

<snip>

>Channel banks are great; the better ones (Adit600) can do far-end
>disconnect
>supervision and I think pretty much all of them do dynamic impedance
>adjustment, meaning they're FAR less prone to echo.  Just about
>anyone's FXS
>modules work, but be careful with FXO modules on channel banks.
>Access Bank
>I and IIs do *NOT* do far-end disconnect, meaning if someone on the other
>side hangs up, Asterisk won't be able to tell.

Andrew,

What configuration do you need to do to the Adit in order to get it to
recognize
FXO side disconnect?  I have tried a number of different settings and can
never
get it to pass through to *.

I am configured with 2 FXS cards and 1 FXO.

My FXO card is running SW ver. 1.12 and my Mainboard is at ver. 7.0.3.  I am
using
POTS lines from SBC.  My lines are getting a loop drop as I have done some
testing with
Voicetronix OpenSwitch cards and they do see the disconnect.

Any suggestions would be appreciated.


Karl Putz


>